Non-woven Wallpaper Gluing, Base Preparation And Corner Processing

Table of contents:

Video: Non-woven Wallpaper Gluing, Base Preparation And Corner Processing

Video: Non-woven Wallpaper Gluing, Base Preparation And Corner Processing
Video: HOW TO HANG NON-WOVEN WALLPAPER | Instruction | WALLCOVER 2023, June
Non-woven Wallpaper Gluing, Base Preparation And Corner Processing
Non-woven Wallpaper Gluing, Base Preparation And Corner Processing
Anonim
  • Types of wallpaper and their benefits
  • Pros and cons of different width wallpapers
  • Calculating the number of wallpapers
  • Base preparation technology
  • We apply the markup
  • Wall wallpapering technique
  • Sealing the edges of the sheets above the plinth

The walls at the entrance to any room are the most contemplated objects, and each owner seeks to make them not just perfect, but impeccable. There are many unique solutions for decorating them today. They can be painted, decorative stucco moldings can be made on them, or pasted over with wallpaper. It is the last method that is the most common, because with the help of this material, and even with a beautiful textured pattern, you can create a truly unique atmosphere. In addition, modern technologies allow the production of wallpapers that can be painted several times. These include non-woven. In this article we will look at the technology of gluing non-woven wallpaper, but first, we will get acquainted with their types and basic principles of selection.

Types of wallpaper and their benefits

Types of non-woven wallpaper
Types of non-woven wallpaper

Non-woven wallpaper is one of the best materials for wall and ceiling decoration. What are their advantages? They, being a material of natural origin, have excellent air permeability due to their porous structure. Gluing non-woven wallpaper to walls allows them to breathe, thereby preventing mold and mildew growth. They can also be repainted many times. There are models on sale that can withstand up to 10 tint cycles with water-based latex paints. In this case, the wallpaper only becomes stronger and more resistant to stress. But due to the latex powder dispersion, the porous structure of non-woven wallpaper changes its textured appearance and with each layer of paint they become less attractive.

They withstand many tint cycles due to their multi-layer structure. Their carrier is fibrous cellulose, which has incredible tensile and tear strength.

But there is no doubt that they will not get wet with an excessive thickness of the glue layer and will not swell. Yes, they also have such a property. Therefore, it is important to observe the proportion and do not forget to carefully spread the glue over the wall surface.

Today, there are at least two varieties of non-woven wallpaper on sale, gluing the walls with which will make the design exceptional and unique:

  • Painting wallpaper
    Painting wallpaper

    Textured or grooved. They perfectly hide defects and minor flaws in the wall surface, creating a relief surface. Such wallpapers can be used absolutely in any room, but it should be remembered that they are less easy to wash. It is better not to wash them at all.

  • The second type is densely embossed wallpaper. Thanks to the production technology, they are more durable, but also thinner. This property suggests that pasting poorly prepared walls with non-woven wallpaper of this type will only highlight nuances and imperfections on the surface. Therefore, they should only be used on a well-prepared substrate.

Depending on the color, there are also two types of wallpaper on sale:

  • Dense embossed wallpaper
    Dense embossed wallpaper

    Colored. They already have a drawing that must be selected and taken into account when calculating the amount of material.

  • Monochrome or tinted. This wallpaper can be dyed up to 10 times, thus creating a new and fresher interior design. This is the main advantage of this material - with minimal costs, significantly change the design of the apartment.

All of the above types of wallpaper are available in two standard sizes with a length of 10 m:

  • width 53 cm;
  • width 106 cm.

Pros and cons of different width wallpapers

For gluing non-woven wallpaper with your own hands in a small room with many windows and doorways, of course, it is better to opt for a standard width of 53 cm for us. With them, in cramped conditions, there is less fuss and hassle. The disadvantage of course is the large number of joints.

The second standard size of 106 cm will become relevant in a large and spacious room. Glue them faster, you need to cut less sheets and half the joints that usually stand out when pasting. In addition, they are cheaper than the first standard size. This is most likely due to the sales policy and management of the companies producing them.

The technology does not require much cost to produce a meter wide canvas, but the cost is almost twice as high. Thus, for a slight increase in waste, we get more profit.

Calculating the number of wallpapers

The rules for gluing non-woven wallpaper first of all include their correct calculation. If there is a large supply, then this is basically nothing. But if you consider the durability of this material, then this is just thrown money. But their cost is quite high than compared to conventional paper ones. And the lack of them can delay the repair for a long time or, in general, ruin it, if there are no similar ones.

When buying, you should pay attention to the batch number. It is always the same for wallpaper of the same type. Also, when calculating, add 2 cm to each sheet. This will help to avoid distortions in case of uneven heights from floor to ceiling.

Each seller has a calculation table, according to which you can always determine which number

Calculation of the number of wallpapers depending on the area of the room
Calculation of the number of wallpapers depending on the area of the room

The number of tubes will be required for a room with such and such parameters. In a few words, everything is pretty simple. Manufacturers produce wallpaper with a small margin in length, which is about 10 cm. And if we take into account that the distance from floor to ceiling is 2.5 m, then in one roll you will get 4 pieces with a margin of 2-2.5 cm for each. But this is true if there is no need to select a drawing due to its absence. If the drawing is present, then it is necessary to take into account its step, which is usually indicated on the package.

Further, for the calculation, it is necessary to find out the perimeter of the room. If it is 10 m, then 53 cm of tubes will need 4 pcs. At the same time, there is still 1 sheet and a quarter in stock, if you subtract the area of the door and window openings. An online calculator will help you more accurately calculate the number of wallpapers.

Base preparation technology

High-quality pasting of walls with wallpaper on a non-woven basis should be carried out only on a prepared wall surface. They should be not just smooth, but even. Bumps and pits on the surface will in any case lead to deformation of the sheet or skew of the joining line. And this, you see, will look awkward at such and such a cost of wallpaper.

Preparing the walls
Preparing the walls

To level the walls, it is necessary to use a putty followed by grouting. And how to prime the walls before gluing non-woven wallpaper? The wall must be carefully coated with a high penetration primer. Non-woven wallpaper is a rather heavy finishing material, therefore it requires a strong and reliable base with high adhesion rates. For simple wallpapers, it is enough to use the glue itself as a primer, but for non-woven wallpapers this can play a cruel joke in the future.

Pasting of walls with non-woven wallpaper is carried out according to the markings. Usually, craftsmen recommend starting from the far corner or from the window. But this was true when thin wallpapers were produced with a special edging for overlap, so that the seams were the least noticeable. Today, technologies require a more responsible approach and direct joining of sheets in a single plane. Therefore, we start the marking from any convenient and as flat place as possible. It is also necessary that the first sheet be laid on it without bends and cuts. Such a place can be a window opening, a door or even a corner.

We apply the markup

Sketches for wallpapering
Sketches for wallpapering

Using a plumb line and a tape measure, a distance equal to the width of one sheet is measured from the starting point and a vertical line is drawn with a soft pencil, preferably gray or close to it. Further, we continue the marking from the existing line along the entire perimeter of the room with periodic control of the verticality of the line. When hitting a corner from one wall to another, you need to make a slight overlap. It can be from 1 to 2 cm. This is necessary in order to avoid a glimpse due to the uneven geometry of the corner. It can then be easily removed with a straight tool (long spatula or a rule) and a sharp construction knife. The outer corners are bypassed in the same way.

That's it, the preparation of the walls for gluing non-woven wallpaper has been fully completed, you can start cutting wallpaper sheets. Non-woven wallpaper should be glued to the newly painted surface of the wall, but you should not apply it to the wallpaper itself. This will lead to over-impregnation, which can lead to deformation and loss of appearance. In addition, from long-term storage in a rolled-up pattern outward, the wallpaper acquired a characteristic spiral shape. To fix this, each cut sheet is folded loosely in the opposite direction and set to wait in line at its place. This will allow you to spend less time on the pasting itself.

Important to remember! If you are new to this business and doubt what to get butt-glued, then at each of its places it is recommended to paint over with paint to match the color of the wallpaper. This will eliminate the possibility of white glimpses of the wall standing out against the background of the colored pattern.

Wall wallpapering technique

Smoothing wallpaper with a plastic spatula
Smoothing wallpaper with a plastic spatula

We applied the markings, prepared each fragment, stocked up with a stepladder and another brush, a soft roller, a wallpaper brush and a plastic spatula, you can start working.

We dilute the glue according to the instructions. Here it is important to pay attention to the consumption with heavy and light wallpapers. Manufacturers also indicate the consumption of glue applied to both surfaces and one.

It is necessary to dilute the glue with water at room temperature. For this, the required amount is collected in the container and, stirring continuously with a wide stick, glue is poured in a thin stream. It is important here to avoid the formation of lumps during the crystallization of the mixture. If they have formed, then they can be easily removed with a conventional reinforcement mesh. It is enough to lower its edge into a container and stir the composition. The clumps will stick to the mesh by themselves.

Trimming wallpaper near the baseboard
Trimming wallpaper near the baseboard

The technology of gluing wallpaper on a non-woven base involves applying glue only to the walls with a soft roller. If this condition is not met, then they can swell and rupture. Then the sheet, prepared and rolled in the opposite direction for alignment, is unrolled and gently applied to the surface. Smoothing it must begin from top to bottom from the center to the edges, but just do not rub. And roll it out with a roller or level it with a special brush. It is usually used for wallpapers with complex textured patterns. All joints are rolled up with a thin roller. It is important not to overdo it here, because the porous structure of the wallpaper can be damaged and a dent will remain in this place. On the methods and options for correcting defects in wallpaper joints. The best selection of videos on how to glue wallpaper.

Sealing the edges of the sheets above the plinth

For better gluing of the sheet, all available corners should be gently pressed with a plastic spatula. Surplus trimming should be done only after the wallpaper is completely dry. For this, a corner is pressed down with a new wide spatula and an unnecessary piece is removed with a sharp assembly knife. For a beautiful and aesthetic finishing of the wall areas around the switches and sockets, the covers should be unscrewed. And when smearing the surface, make sure that no glue gets into the nest. The best option, if lighting permits, would be to de-energize the entire room. More details on how to glue wallpaper in the corners.

In addition to the above instructions, it will be helpful to watch the video.

Video:

Popular by topic

Interesting Articles
How To Keep Warm In A Room By Using Insulation
Read More

How To Keep Warm In A Room By Using Insulation

Laying the material for warming the room on the base of the floor, choosing the optimal method of insulation, using sprayed materials and expanded polystyrene, warming the warm floor

Installation Of A Water-heated Floor Video
Read More

Installation Of A Water-heated Floor Video

This type of heating is the most suitable solution for a country house

Download The E-book On Tiling, Read For Free
Read More

Download The E-book On Tiling, Read For Free

How to lay the tiles correctly, tips for tiling. Download in a convenient electronic format in fb2, txt, pdf, rtf, epub, mobi format or read for free without registration