2023 Author: Philip Bishop | [email protected]. Last modified: 2023-06-03 21:41
- How to calculate wall masonry with a calculator?
- What data will you receive when filling out the online calculator for the number of bricks in masonry?
- Brickwork calculator
- How to calculate the amount of masonry solution?
- Calculation of the amount of brick and mortar for brickwork yourself
Before erecting a brick house, it will be correct to calculate the number of bricks in the masonry, and in this case, an online calculator will become a wonderful assistant, which will calculate the amount of bricks and mortar for future construction or cladding of a structure, as well as other related materials.
Thanks to the calculator for calculating the masonry, you can calculate the amount of masonry mortar, flexible ties, and the result will be as accurate as possible, depending on the individual parameters entered by the user into the table.
How to calculate wall masonry with a calculator?
Brick is the most demanded and widespread building material, it serves for a long time and pleases with a neat appearance. Today there are several types of bricks for the construction of buildings:
- a brick made of clay and other fillers is called adobe;
- ceramic, the most used, of fired clay;
- silicate, made from sand and lime;
- with the addition of cement - hyper-pressed;
- clinker, from a special composition;
- refractory.
Such materials are used both for laying a house and for building additional finishes in the future, creating a facade, and interior structures. Fireclay bricks can withstand high temperatures and various heating and cooling cycles without losing strength.
Bricks can be hollow, porous, the most common standard size of this product is 250 × 120 × 65 mm, with preliminary calculations of brick consumption, brick dimensions increase by 10 mm for each parameter.
What data will you receive when filling out the online calculator for the number of bricks in masonry?
- The total length of all walls of the structure along the perimeter of the structure.
- The total masonry area on the outside of the walls.
- The wall thickness will be taken into account based on the thickness of the finished wall and the size of the mortar joint.
- The total number of bricks and the total weight of the material.
- The amount of solution for the entire masonry will depend on the ratio of the components and the additives introduced.
- And the length of flexible ties will be determined by the total wall thickness, taking into account the amount of the insulation base.
- The amount of masonry mesh will improve the overall strength of the structure.
- The approximate weight of the finished walls will be calculated excluding the weight of insulation materials and cladding.
To calculate bricks for masonry with a calculator - online, you need to enter the required parameters in the prepared table and click on the "calculate" button. Within a few seconds, the program will give the most accurate result. The error rate can range from 3 to 7%.
Brickwork calculator
Masonry type: | Select 0.5 brick masonry 1 brick masonry 1.5 brick masonry 2 brick masonry 2.5 brick masonry |
Brick size: | Single (250x120x65 mm) One and a half (250x120x88 mm) Double (250x120x138 mm) |
Wall area: | m ^{2} |
Calculation to make: | taking into account a mortar joint with a thickness of 5 mm without taking into account a mortar joint |
Brick consumption: | |
Solution consumption: |
Calculators from wpcalc.com
How to calculate the amount of masonry solution?
To make a mortar for brickwork, you need to mix sand and cement to create a plastic mixture, usually this ratio of materials is equal to a third of the sand and one cement.
But the final consumption will be determined by special requirements according to the laying material and the grade of the raw materials used. Often, additional additives (clinker, marble, crushed stone, synthetic substances) are added to the finished mixture in order to increase the speed of setting of the masonry and increase the strength of the material.
The calculation of the amount of mortar for brickwork can be done using an online calculator, which in a matter of seconds determines the amount of mortar for brickwork as accurately as possible.
The mortar consumption depends on the type of the selected type of seams.
Such a program will allow calculations to be made relative to the total volume of the cement mixture. The reliability of the data obtained will be determined by the accuracy of specifying the dimensions of the wall and joints.
In the presence of concrete wall belts, calculation is provided from the height of the general measurements. The construction calculator for mortar consumption per 1 m ^{2 of} brickwork makes it possible to quickly and conveniently calculate the desired parameters.
Such data will allow you to navigate the cost of masonry, as well as calculate the required amount for the construction of a building. Depending on the additional additives, the rigidity, strength, mobility and adhesion of concrete will depend
The mortar consumption calculator for brickwork will help to avoid unnecessary material costs if you correctly calculate the consumption and other work, for example, pouring the foundation, screed walls, etc.
Calculation of the amount of brick and mortar for brickwork yourself
There are other, more troublesome options for calculating the number of bricks in 1 m ^{2 of} masonry and the required mortar. How to calculate the material for 1 m ^{3} ?
To build one cubic meter of wall, you need to take about 400 pieces. bricks with a stock of 10 pcs., the rate consumption is 0.23 m ^{3} per 1 cubic meter, if you use a hollow brick, then the mortar consumption will increase several times to fill all voids and depressions.
Without a brickwork calculator online, you need to manually produce a lot of calculated data, you need to know the geometric dimensions of the intended brickwork, taking into account the type of brick and its thickness.
It is best to entrust such work to specialists, so as not to go on false data and not to lose material investments. If the construction of walls 5 m long and 3 m high is required, then the area of such a wall will be 15 m ^{2}, for such masonry 51 pieces of bricks are required.
There are many tables and prepared materials where you can familiarize yourself with the data on the wearing of the brick size, type of work and the amount of mortar used. Based on these numbers, you can get the desired result.
And when using a brickwork calculator, the calculations are performed much faster and most accurately, with a maximum number of deviations of up to 7%. Build and calculate quickly, correctly and enjoy the results!
Table for calculating masonry mortar for walls of different thicknesses (per 1 m3)
0.5 (12 cm) |
||||||||||||
Brick, pcs. |
400 | 394 | Solution, m ^{3} | 0.221 |
0.240 |
Brick, pcs. |
308 | 294 | Solution, m ^{3} | 0.200 | 0.222 | 0.227 |