5 Original Ways To Restore Kitchen Furniture Facades

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-05-24 22:24

• Solutions to the problem
• Using self-adhesive and photo printed film
• Painting and decorating the kitchen facade
• Use of decorative inserts
• Kitchen art painting
• Replacement of facades
• Related Videos

Kitchen furniture is under heavy strain. It is affected by such negative loads as high humidity, temperature drops, as well as aggressive substances. As a result, the products lose their original appearance and shine. Therefore, there is often a need for such a process as the restoration of kitchen facades.

Solutions to the problem

So, the repair of kitchen surfaces can be done in the following ways:

• use of self-adhesive and photo films;
• painting of products;
• artistic painting of the kitchen;
• the use of decorative ilements and inserts;

Of course, do not forget that you can change the facades on the kitchen set.

Using self-adhesive and photo printed film

This method is considered the simplest and cheapest. There is a wide range of such films on the market today. Models with imitation wood, marble and other natural materials are especially popular. When choosing, you should pay attention not only to the appearance of the material, but also to its quality and performance properties.

When it comes to self-adhesive film, experts recommend opting for vinyl products. This popularity is due to the fact that such a material is waterproof, which allows you to reliably protect the wooden kitchen facade from the high humidity that is present in the room. Also, the film withstands temperature drops and mechanical stress well.

The most popular modern solution is to cover the kitchen facade with a film with photo printing. This allows you to create your own unique style.

To glue the kitchen facades with foil, you need to have a set of certain tools and materials at hand:

• a film and a scraper with which it will be smoothed;
• ruler and meter;
• scissors and a stationery knife.

When all the tools are prepared, you can proceed to the direct restoration of the facade, which is carried out in the following sequence:

• Measure cabinets and all furniture elements that will be covered with foil. To simplify the work, it is better to remove them and lay them on a flat surface.
• Prepare the elements for pasting. For this, all fittings are removed. Wash the facade thoroughly. Particular attention should be paid to greasy stains. If such pollution remains somewhere, then in the process of operation the decorative film for the kitchen will begin to swell and move away. As a result, the aesthetic appearance and integrity of the coating will be compromised. At the end, dry the garments thoroughly.
• Cut the film according to measurements that were obtained earlier as a result of measuring the elements of the facade. To facilitate the process, it is worth using a special mesh, which is applied to the back of the material. This will allow you to make a high-quality, even cut of the film. Experts recommend paying special attention to models with repeating patterns. After gluing, they must match.
• Cut the film along the markings. It is better to do this with a stationery knife. Curvilinear patterns are cut with scissors.
• Stick the foil on the facade. At this stage, all work should be done slowly. The decorative film is gradually glued in the kitchen. In this case, the protective paper must be peeled off a few centimeters.

If you try to stick the entire film at the same time in a layer, it will not give the desired result. The material will lay unevenly, which will lead to the repeated restoration of the facade element.

After all the lockers and other products are pasted over, the headset, which was previously removed, is fixed on them

At the final stage, it remains only to hang the products in their place. Thus, do-it-yourself restoration of kitchen facades is carried out. With the help of the film, you can not only return the original shine to the furniture, but also refresh the interior. The peculiarity of this material is that it can be used on any surface. It's also worth noting that vinyl is very easy to clean, making it easy to keep your kitchen clean.

Video:

Painting and decorating the kitchen facade

Often, the restoration of kitchen facades is carried out using technology such as molding, the essence lies in attaching decorative elements to furniture. In this case, we are talking about semicircular strips. They are most often used on flat facades. As a result of the restoration, you can get completely different furniture, which will be distinguished by its originality and elegance. After fixing the decorative strips, painting is performed, which will give the facade a finished look.

To update kitchen furniture, you need to have on hand:

• glue for wood;

  

• semicircular strips;
• roulette;
• file;
• spray gun;
• glossy paint;
• drill;
• screwdriver.

Decorating and painting the facade of the kitchen is carried out in the following sequence:

• Prepare facade elements. First of all, they need to be removed and the fittings dismantled from them. After that, thoroughly clean them from dirt. Particular attention should be paid to greasy stains. Since in the process of restoration of the facade it will be painted, it is better to carry out the work outdoors. It is preliminarily placed on the film.
• Measure and cut the planks to the desired size. The edges of the decorative strips are cut at an angle of 45 ^°. After that, you can start attaching them to the facade. For this, it is recommended to use high-quality glue, which will ensure reliable fastening of decorative elements.
• When all the strips are glued, the products are prepared for further painting. It should be borne in mind that you need to wait some time for the glue to dry completely. After that, the surface is primed. You can use a spray gun for this. The reservoir is filled with a primer and sprayed at a distance of 20 cm from the product. Before proceeding with further work, you must wait until the primer is dry. It will take about an hour.
• Painting is carried out in the same way as priming. Prepared paint is poured into the container of the spray gun and sprayed at a distance of 20 cm from the surface. For painting the facade, experts recommend using deck paint, which is highly resistant to various influences. If desired, you can decorate the surface with various patterns. For this, stencils are used.

It is worth noting that painting wood or MDF products must be done with a spray gun. Using available tools such as a roller or brush will degrade the quality of the product.

When the paint is completely dry, the fittings are installed. New products can be used if desired. The main thing is that the fittings fit optimally into the new kitchen design. Further, the finished elements of the facade are fixed in place

Observing all the rules and sequence of work, you can do the restoration of the facades of kitchen furniture with your own hands. The main thing is to choose the right paint that will be optimally combined with the interior of the room.

If the restoration of kitchen facades seems difficult, then contact a specialist.

Use of decorative inserts

Although these types of repair work are not very popular, the restoration of mdf kitchen facades can be carried out using decorative inserts. Most often they use for this: ceramic tiles, rattan, decorative nets.

Of course, if the furniture has lost its original appearance, then it still needs to be painted, and then start decorating. As in previous cases, the restoration of the facades of kitchen furniture can be done by hand:

• Training. Remove facade elements and remove all fittings from their surface. Clean them from dirt. To make this process easier, it is best to use detergents. Wipe the surface dry before painting.
• Painting. When the products are prepared, you can start painting them. To protect wood from negative environmental factors, it should be covered with deck paint. To apply the paint and varnish, you can use any tool, be it a brush or a spray gun.
• When the paint is completely dry, you can proceed directly to decorating the facade. It is recommended to use tile adhesive for fixing tiles. You need to do the work very carefully. Excess glue should be removed immediately, before it dries.

It is important to know that tiles have weight, and door hinges are not designed for this

To complement the decoration, a molding is attached around the tile applique. As for rattan inserts, they are mounted in the facade using the following technology:

• First of all, you need to measure the doors, which will allow you to calculate how much rattan cloth you need for decoration.
• Moisten the rattan cloth with cold water, which will allow it to slightly increase in size. Once dry, it will stretch like a string.
• At the next stage, the slats are prepared, with the help of which the rattan will be attached. They may differ slightly in color from the decorative material.
• The prepared canvas is cut to size and attached to the facade with planks and furniture nails.
• At the final stage, the installation of fittings is carried out. The doors are installed in place.

Thus, it is possible to give the furniture a completely new design. But, the main thing is that you can do it yourself.

Kitchen art painting

Perhaps the most interesting, but rather painstaking, is the hand-painted art painting of kitchen doors. The cost of work starts from 5000 rubles. per sq.m. With this type of work, the imagination is limitless in creating a design.

Replacement of facades

If there is no time to carry out an update or the products have lost their integrity, then you should think about replacing the facades in the kitchen. This is quite easy to do. It is necessary to carefully measure all elements and order new ones in specialized carpentry shops. Any material can be used for the manufacture of a new facade, be it solid wood or MDF.

If the kitchen furniture has a complex geometric shape, it is better to use the services of a professional. To do this, you need to invite a master who will make accurate measurements of the facade. It is worth remembering that the appearance of the kitchen will depend on this.

Other ways to transform furniture.

Related Videos

Video:

Video:

Video: