How To Distinguish A Fake From An Original Bosch Rotary Hammer

Table of contents:

Video: How To Distinguish A Fake From An Original Bosch Rotary Hammer

Video: How To Distinguish A Fake From An Original Bosch Rotary Hammer
Video: Как отличить подделку от оригинала (Bosch GBH 2-26 DFR, GBH 2-26 DRE) Подделка на Бош 2023, September
How To Distinguish A Fake From An Original Bosch Rotary Hammer
How To Distinguish A Fake From An Original Bosch Rotary Hammer
Anonim
  • Bosch rotary hammer classification
  • How to identify a fake Bosch rotary hammer
  • Determination of a counterfeit by the appearance of a case for transporting Bosch rotary hammers
  • Determination of a counterfeit by the appearance of the body of Bosch rotary hammers
  • How to avoid fakes

The Russian user was convinced of the reliability of Bosch rotary hammers firsthand. Various construction forums provide user opinions on the high performance of Bosch rock drills, their operational reliability and convenience.

Bosch hammer drills are equipped with a dust removal system, a shaft rotation stabilizer, a drilling depth limiting rail, a "soft start" system, a rotation speed controller, anti-vibration devices, and overheating protection devices. This all applies to the original designs of Bosch rotary hammers 2-20, 2-24, 2-26.

But not everyone knows that along with the originals there are also fakes. This fully applies to Bosch rotary hammers.

And how to distinguish a real hammer drill from a fake or Chinese-made tool?

Just a few words about the Chinese famous brands of rotary hammers.

Chinese rock drills manufactured under license or at factories in China owned by Bosch (Dremel, Rotozip, Skil) are no different in quality from Bosch rock drills manufactured in Germany.

True Bosch
True Bosch

Recently, Western manufacturers have been trying to locate their production in China. The differences between the Chinese and branded hammer drill are in the finished product acceptance system.

For Bosch rotary hammers made in China for Western Europe, there are two stages of control: factory acceptance and acceptance already in the purchasing country. Chinese rock drills shipped to Western Europe go through factory acceptance, and upon arrival in the customer country, they are checked there by means of incoming inspection.

The rest of the hammer drills, which have not passed factory control at factories in China, are sent to third countries. But they are made from the same parts, on the same lines, by the hands of the same workers. And they are 4-5 times cheaper. The quality is no different.

Professional Bosch
Professional Bosch

When buying any tool, first of all, pay attention to the appearance.

Remember the golden rule: If the appearance of a Bosch case or hammer drill differs from the original, there cannot be a branded tool inside.

Bosch rotary hammer classification

Perforators from Bosch are conventionally divided into professional and household.

Domestic hammer drills weigh much less professional ones with a power of up to 900 watts. Among the disadvantages of household rotary hammers, we single out the poor cooling of the electric motor and high impact on impact.

The advantages of professional rotary hammers from Bosch include:

  • high power;
  • efficiency in engine cooling;
  • the presence of vibration damping devices;
  • long-term operation.

Of the shortcomings, two main ones should be noted: high prices and high weight.

How to identify a fake Bosch rotary hammer

By its appearance, you can easily determine whether it is a fake in front of you or the original.

It is necessary to start acquaintance with Bosch hammer drills by examining the suitcase (case) in which the tool is placed.

Determination of a counterfeit by the appearance of a case for transporting Bosch rotary hammers

Examining the appearance of a suitcase for transporting Bosch rotary hammers, pay special attention to the inscriptions, various nameplates, latches, and the quality of casting.

When examining the exterior of the tool storage and transport case, pay particular attention to the latches. They must be imprinted with the Bosch lettering. Fake Bosch rotary hammers simply do not have such an inscription on the latches.

Real Bosch case
Real Bosch case

When examining the suitcase, pay attention to the size of the gaps between the closing lids. There should be no gaps, or the minimum gaps around the perimeter should be the same everywhere. For fakes, the covers do not fit tightly, with a bias. Cast flakes and burrs are visible on the covers.

Counterfeit case cover gap
Counterfeit case cover gap

Pay attention to the branded inscription on the suitcase. The original suitcase has a convex sign and inscription, made by casting, the so-called 3D signs. The inscriptions of the fake suitcase are pasted and easily peeled off with a fingernail.

Bosch original case
Bosch original case

Fake punchers have a special sticker on the back of the suitcase with various codes, inscriptions and codes. Don't pay any attention to her.

Gaps on the original Bosch rotary hammer case
Gaps on the original Bosch rotary hammer case

It is designed to distract your attention from a fake. The original simply does not have such a sticker.

On the back of the original suitcase, the Bosch lettering and the brand name are stamped. There are no such embossed inscriptions on the fake.

Case fake
Case fake

To distinguish a fake Bosch punch from the original, you need to buy a power tool in specialized stores with all the necessary documents.

Video of determining fakes of a Bosch rotary hammer by the appearance of a suitcase for transportation.

Let's open the suitcase.

Determination of a counterfeit by the appearance of the body of Bosch rotary hammers

On the body of the original, all inscriptions and badges are applied by the method of extrusion. At a fake punch, the inscriptions are either glued on the film, or each letter is glued. These inscriptions and letters are easily peeled off when picking with a fingernail. In the original, this is impossible in principle.

Bosch-original (top) and fake (bottom)
Bosch-original (top) and fake (bottom)

There are Bosch 2-24 rotary hammers, which have a blue body. As a rule, these are rotary hammers made in Europe. They are most often the subject of counterfeiting. An incorrectly applied inscription is immediately visible on a fake. Instead of the Bosch 2-24 inscription, a set of letters and numbers is pasted on the fake, which at first glance resemble the original inscription.

And the last thing. The factory-made Bosch rotary hammer is printed or embossed. For a fake Bosch hammer drill, the inscriptions are stuck on a self-adhesive.

These are the main characteristics of counterfeits, determined by the appearance of a power tool.

How to avoid fakes

In order not to fall for a fake, you must adhere to several recommendations:

• do not buy a power tool from your hands, in online stores, in the markets;

• do not be fooled by a low price, a quality tool cannot be cheap;

• buy only in specialized power tool shops with the registration of all warranty documents

Do not be gullible, do not fall for simple tricks, do not pursue cheapness.

I wish you success!

Recommended:

Interesting Articles
How To Make A Wardrobe With Your Own Hands, Built-in. Drawings And Assembly Diagrams Of The Sliding Wardrobe, Self-installation Of Sliding Doors
Read More

How To Make A Wardrobe With Your Own Hands, Built-in. Drawings And Assembly Diagrams Of The Sliding Wardrobe, Self-installation Of Sliding Doors

Do-it-yourself built-in wardrobe with a photo. How to make a sliding wardrobe yourself, refine, install sliding doors with detailed photo instructions, you will learn from us

How To Choose A Drill For Home, Which Hammer Drill Is Better
Read More

How To Choose A Drill For Home, Which Hammer Drill Is Better

Choosing a convenient hammer drill for the home, the optimal combination of the cost of the tool and the characteristics of the advice of experienced craftsmen

Sharpening Tools, How To Sharpen Tools Correctly. Tool Sharpener, Bar, Whetstone, File
Read More

Sharpening Tools, How To Sharpen Tools Correctly. Tool Sharpener, Bar, Whetstone, File

Sharpening is carried out using tools such as a bar, a sharpener, a whetstone and a file. In order for the work to be done efficiently and not require significant physical effort, it is important to monitor the condition of all tools. First of all, you need to monitor their sharpening, which is carried out using tools such as a bar, a sharpener, a whetstone and a file. Sharpening tool This tool is designed to sharpen the blade of cutting tools. Sharpeners are produced in various