Water Supply Of The Apartment Tips And Methods Of Installing Plumbing Pipes. What Pipes To Choose For Plumbing Video Tips

Table of contents:

Video: Water Supply Of The Apartment Tips And Methods Of Installing Plumbing Pipes. What Pipes To Choose For Plumbing Video Tips

Video: Water Supply Of The Apartment Tips And Methods Of Installing Plumbing Pipes. What Pipes To Choose For Plumbing Video Tips
Video: How Your Home Plumbing Works (From Start to Finish) | GOT2LEARN 2023, September
Water Supply Of The Apartment Tips And Methods Of Installing Plumbing Pipes. What Pipes To Choose For Plumbing Video Tips
Water Supply Of The Apartment Tips And Methods Of Installing Plumbing Pipes. What Pipes To Choose For Plumbing Video Tips
Anonim
  • Methods for wiring water supply
  • Hidden and open laying of water pipes in the house
  • What pipes can be used for installation?

What should be the water supply scheme for an apartment? Before starting work,

you came to the conclusion that the pipes for the water supply in the apartment need to be replaced, since the existing water supply system is rotten and has become unusable. The issue of replacing communications can also be prompted by such factors as the need for major repairs in the apartment, moving into a new building, where, in addition to the walls, everything will have to be done by hand. If the apartment is new, then here you have the cards in hand, as they say, since a well-thought-out water supply scheme in an apartment can turn out to be convenient to use. Before starting work, one important point should also be taken into account: do-it-yourself plumbing should be installed in the apartment in parallel with the water filtration system.

Filtering elements can be installed both for each crane separately, and at the input, after the meter. You should take care of this at the very beginning, before installing the water supply system, since the quality of the water consumed and your health will depend on this. In addition, filtered water contains a small percentage of impurities and salts, which will significantly extend the service life of pipes and auxiliary equipment.

Before proceeding with the installation of the water supply system, it is necessary to resolve a number of issues:

  • Select pipes and, accordingly, the material from which they will be made.
  • It will be determined with the number of fittings, valves, taps, pipes, risers and other elements of the plumbing circuit. To facilitate the solution of this difficult issue, planning is necessary.

First, a water supply scheme for the apartment should be drawn up, the plan of which should be displayed on paper in the form of a drawing, taking into account the layout of the premises.

A competently drawn up drawing will help determine the choice of consumables and the number of all elements of the water supply system.

The old plumbing system can tell you how many pipes will be needed for installation if you have not decided to make a complete redevelopment of the plumbing system. When planning a water supply system, do not forget to think about the possibility of connecting additional equipment for the future, for which it is necessary to prepare backup places for their connection.

Video:

Methods for wiring water supply

Laying water pipes in the apartment. Tee and collector water supply circuit of the apartment.

The installation of water pipes in an apartment can be carried out in several ways, the most relevant and technically correct are the tee and collector circuits. Let's take a closer look at them:

A tee (sequential) scheme for connecting a water supply system in an apartment implies a wiring from the central water supply line to all consumers separately. With this connection method, a large number of connecting elements are used, however, the pipe consumption is slightly less than when using the collector method. In addition, laying a water supply system in an apartment using tees and fittings is not a complicated structure, and at a price it comes out quite affordable. The significant disadvantages of this scheme include the periodic flow of water in some connection points, since the system consists of many separate elements. In addition, at some connection points, a decrease in the pressure of the water head may be observed. Possible water supply wiring diagram in the apartment.

Water supply wiring diagrams in the apartment

The collector connection scheme is considered more reliable, although the costs for it will be significant. But the game is worth it, so it is better to invest once in a competent installation of water supply in an apartment. A distinctive feature of this scheme is the independent connection of each consumer in the apartment from the supply branch, which makes it easy to carry out prevention, repair and replacement of each of them without disconnecting the entire water supply system. This, unfortunately, cannot boast of a sequential circuit through which a water supply device can be mounted in an apartment. In addition, replacing the water supply pipes in the apartment will not pose any problems, since this can be done autonomously in certain sections of the water supply system. This connection scheme is practically devoid of serious drawbacks.

Video:

Hidden and open laying of water pipes in the house

Surely you had to deal with the fact that the pipes outside, over time, begin to annoy, and they do not have a very aesthetic appearance. This is especially true for old apartments that have long been in need of renovation. Remember how ugly the installation of a water supply system in an apartment looks, especially risers and pipes in small rooms of a toilet or bathroom, which have to be sewn up with decorative screens, thereby limiting the already scarce space. Therefore, open pipe laying has a certain disadvantage. But the hidden gasket will allow you to remove the pile of pipes. In addition, replacing water pipes in an apartment in a hidden way has a number of significant advantages. Both methods have certain characteristics and advantages:

With the hidden method, pipes are embedded in the grooves of the walls, then they are closed, after which the room has a beautiful appearance. Replacing the water supply risers in the apartment is also necessary, since over time, their clearance narrows, and they become clogged, which can lead to undesirable consequences. In addition, the pipes hidden in the walls do not interfere with the placement of furniture, plumbing items, household appliances and other equipment that sometimes cannot be installed due to the fact that pipes simply interfere. In addition, the absence of pipes from the outside excludes their damage.

Replacing water pipes in an apartment in an open way also has positive nuances. First of all, there are no restrictions on the choice of consumables, so any pipes can be installed. Installation and replacement of water pipes in an apartment does not require cutting out the strobes for laying them, which means that the costs will be much lower. In addition, replacing a leaky element of the system will not pose any problems and it will be much easier and more convenient to do than in a hidden water supply system. The disadvantages include an unsightly appearance and a decrease in the usable space of the room, which sometimes makes it impossible to install, for example, a furniture module.

Video:

What pipes can be used for installation?

Pipes made of stainless steel are considered durable, since their service life exceeds 60 years, moreover, they are not afraid of rust and build-ups. They are easy to install, however, such pipes are very expensive. Through them, for example, through heated towel rails, the temperature of the hot water supply in the apartment is easily determined.

Copper pipes are also expensive, but they can last up to 80 years and are very easy to install. They are not afraid of corrosion and easily bend during installation.

Polypropylene pipes have good strength and can be used for over 50 years. For installation, you will need a special soldering iron and a hacksaw (or scissors) to cut them. The hot water branch is recommended to be laid with metal or fiberglass reinforced pipes.

Polyethylene pipes are also joined by welding. They are quite durable and can last for over 40 years.

Video:

Recommended:

Interesting Articles
Fragrant Rue - Useful Properties, Cultivation And Application Of Fragrant Rue Recipes
Read More

Fragrant Rue - Useful Properties, Cultivation And Application Of Fragrant Rue Recipes

RueGrowing, useful properties and recipes for using fragrant rueBotanical characteristics of rueFragrant rue is a perennial, fragrant and strong plant. The stems of the plant are erect, branched and bare, growing no more than half a meter

Diet For Slimming The Abdomen, Sides And Waist: Secrets Of A Thin Waist
Read More

Diet For Slimming The Abdomen, Sides And Waist: Secrets Of A Thin Waist

Diet for weight loss of the abdomen, sides and waistDespite the fact that obesity is a real scourge of our time, the vast majority of people still do not have such serious problems with being overweight. Most often, they simply have unwanted centimeters in the waist area and fat deposits on the sides

Red Clover (meadow) - Medicinal Properties And Contraindications
Read More

Red Clover (meadow) - Medicinal Properties And Contraindications

Red meadow cloverWhat is red clover?Red (meadow) clover - belongs to the legume family. The international botanical name is Trifolium pratense "trifolium". The medicinal effect of this plant on humans has long been studied, therefore it is widely used as an effective traditional medicine for the treatment of certain pathological conditions