2023 Author: Philip Bishop | [email protected]. Last modified: 2023-05-24 22:24
- Avoiding problems
- Means and methods of application
- Subtleties of cleaning
- Preparatory stage
- Cleaning of construction dust
- How to clean plaster
- Removal of polyurethane foam, glue, paint
It is impossible to do in a living space without repairs. This is due not only to gluing wallpaper, but also to changing the floor covering, where laminate is most often chosen. But it is worth noting that after the completion of the repair and an incorrect approach to its execution, the doors, walls, floor and other interior items in the room remain dirty. This can and should be dealt with. Each type of pollution has its own characteristics, which should be paid special attention to.
There are several options that will help you avoid particular difficulties when carrying out repairs. After all, especially small debris will be hammered into any minor crevices, into floor elements, furniture, etc. it will further negatively affect the state of human health, causing cough, sore throat, lungs.
In order to spend less time and effort on cleaning in the future, you should carefully prepare for the repair. All furniture is taken out, which will not only interfere, but also accumulate debris. Existing clothes are packed in plastic bags or boxes that close tightly. No dust should get into them. When reinstalling furniture in another room, it will not be superfluous to wrap it with plastic wrap.
If the ceiling is whitewashed and a new laminate flooring is present, the floors must be protected. For this purpose, the entire surface is covered with a special film, which is fixed around the perimeter of the room. Masking tape will help with this, since the usual one will subsequently leave traces. If you do not spend time fixing the film, but simply spread it over the area, it will not bring any result.
Low reliability in old newspapers, which are also laid out on top of the laminate. If it gets wet, they lose all their qualities. To avoid this, the newspaper go to bed in 2-3 or more layers. It is strongly not recommended to use the fabric, as in any case it will be able to pass the dust that gets on the laminate in the room. It is easier to prevent each of the contamination than to wash it off and waste a lot of time.
Means and methods of application
Many people wonder about how to clean the floor after renovation. When cleaning the laminate, you can use a large number of products, each of which has its own subtleties in application. Below is a possible list:
Kerosene. Alternatively, vegetable oil can be used. Any construction dust will be easily removed from the floor surface. It is enough to add just a few drops of the product to a basin of water and get to work. After the first rinsing of the floor, vinegar is used instead of oil, and then ordinary clean water is used for the final cleaning after the renovation.
As for kerosene, half a glass will be enough for a bucket of clean water. All that remains is to wipe the surface with detergents.
- Household chemicals. In addition to standard special floor products, window cleaners are also suitable. Instructions are used to dilute the product. The main thing is not to overexpose it on the surface, which is considered very sensitive. At the same time, attention is paid to the fact that the product is not contraindicated for cleaning the laminate after repair.
Potassium permanganate, table salt. First, rinse the dirty floor with detergents, and only then add table salt to cool water (half a glass).
When the base in the room is rinsed with the resulting solution, wipe everything with clean water. Alternatively, potassium permanganate or potassium permanganate is used. The "working" liquid should turn out to be bright pink. But the last option will not work if the laminate has light shades, since everything will manifest itself from the negative side. Thus, you can get rid of the stains that appear after cleaning the whitewash.
Subtleties of cleaning
To work on cleaning the floor and doors to the premises, a set of tools should be prepared. In this case, it is worth paying attention to the floor covering itself, its specific appearance, since it has features when using specific means.
In the presence of linoleum, when cleaning it, soda and soda solutions should be avoided. The appearance of the coating will noticeably change for the worse. For parquet, laminate and similar coatings, abrasives that damage the protective layer are strictly prohibited. If paint, similar liquids get on the floor, it is best to wipe them off immediately, rather than waiting for a time to dry completely.
If the coating is covered with a layer of varnish, potassium permanganate cannot be used when cleaning the floor after repair. This will lead to stubborn stains. At the same time, the frequency of changing water to clean water during cleaning will affect the speed of removing stains and other contaminants. This is especially evident when removing whitewash, since it leaves a large number of stains, especially if you forget to change the water in time.
In order not to stomp on the surface that has been washed, work is started from the far wall in the room.
Everyone should know how to clean the floor and doors after repairs efficiently and with less time. All work on cleaning the sub-floor in the apartment should be started from the preparatory stage. The floor is swept and all remaining debris and dust are removed.
In the presence of cement stains, paint, plaster, scrape them off as much as possible. A small spatula is perfect for this. Further, the remnants of debris and dirt after repairs are wetted. A soft sponge will help with this.
A moistened broom is swept the surface of the floor with a laminate, starting from the far corners of the room to its central part. The cleaning process should be treated with great care, especially if it is a low quality laminate. If you do not work carefully, the floor covering swells and changes its appearance. Wet cleaning will lead to the need to change the laminate to a new one.
Cleaning of construction dust
For consideration, there are several methods that can be used to get rid of dust after a repair.
Oil solution. Vegetable oil does an excellent job, a few drops of which are added to clean water. The proportions are usually taken 1 to 100.
Next, the floor is wiped with water and vinegar. It is worth noting that an alternative vinegar option is any product that contains chlorine. All that remains is to rinse the floor with clean water.
- Cooking salt will remove the whitewash.
- 100 grams of kerosene is added to a bucket of water, with a solution of which dust is wiped and all construction dust is removed.
- The whitewash may have been on the surface of the laminate for some time. In this case, you should use a universal floor cleaner in a ratio of 1 to 100. The same applies to specialty detergents such as Mr. Proper. In addition, the last remedy can not even be washed off with clean water, but left on the laminate. The main thing is to observe the proportions exactly.
There is Amway LOC, which has excellent all-round concentrates that can handle just about any kind of contamination. The proportions are 1 to 20. The floor is washed with the resulting solution. No further cleaning with clean water is required.
- There is a remedy for removing gypsum dust and whitewash. Almost any hardware store can offer this option for buying and cleaning laminate flooring after renovation. After applying the solution, it will have to be washed off with clean water.
How to clean plaster
A quick hardening process is typical for gypsum plaster, longer for cement plaster. This is worth paying attention to if it gets on the laminate during repair work. In order to carry out high-quality cleaning of floors after repair from plaster, various chemical agents, such as Plitonite Cleaner, can be used. There is another option for getting rid of gypsum plaster.
Apply a wet fabric to soften the areas with plaster. When the process comes to its logical conclusion, the plaster is removed and the surface is washed with a solution of oil and vinegar, as well as clean water.
For cement plaster, everything will be slightly different. Acetic acid is applied to the contaminated areas for about 10 minutes. After that, when the plaster is dissolved, it is removed with a dry cloth. Depending on the surface and the selected flooring option, you can also choose special cleaners, concrete solvents from well-known manufacturers. The main thing is to re-read the instructions to make sure there are no contraindications. You should worry about the safety of the floor covering, than later change it to a new one.
Removal of polyurethane foam, glue, paint
If polyurethane foam gets on the floor covering, Dimexidum solution will cope with it. It can be purchased without any problems at any pharmacy.
The cost is not high, but it has a very unpleasant smell. At the end of cleaning, you will have to carefully ventilate the room to get rid of it. The cleaning process after repair of the polyurethane foam is as follows: Dimexide is applied to a cotton pad, and then applied to the dirt. It will take 10 minutes to wash such a stain. Dimexide helps to cope with many other difficult contaminants.
Glue often gets on the laminate after wallpapering the walls. The main thing in this case when cleaning is not to spread it throughout the room. To dissolve the glue, ordinary warm water with a temperature of about 40 degrees is suitable. A wet cloth removes stains and splashes from the floor covering, after which the laminate is cleaned with suitable means.
There will be much more problems with paint, since only it itself can negatively affect the protective layer of the laminate. Cleaning is usually done with solvents or acetone.
In this case, it should be carefully applied to the spot itself, and not to the floor covering. It is not worth withstanding these funds, but if possible, immediately remove paint stains in order to leave the protective layer of the laminate in its original state. This is how work is carried out to remove dried stains. If fresh paint spots are found, vegetable oil will cope with them. They deal with varnish stains in the same way.
In the absence of a solvent or if it cannot handle the paint, diesel oil, gasoline, and alcohol are suitable as alternative means of combating pollution. Never use sharp objects that are used to scrape the surface.
When cleaning laminate flooring after repairs in the room, you should use some tips to help you do everything better and faster.
First of all, you need to change the water more often when cleaning. This will be especially important when getting rid of whitewash, which leaves a large number of stains. As a result, we get the answer to the question of how to clean the floors after repair without streaks.
More attention is paid to paint and it is better to get rid of it as soon as the stain hits the floor covering. Once the paint dries, it will be much more difficult to deal with it without negatively affecting the laminate flooring.
Most of the products have a pungent and unpleasant odor. In this case, all work is best performed in those rooms that are well ventilated. Windows and doors are opened so that clean air constantly flows inside. It will not be superfluous to use special gloves for protection, as well as special clothing. A floor after renovation requires attention and time to bring it back to its original form.
Each method has its own characteristics, both for flooring and for a specific type of application. In any case, you should pay great attention to reading the instructions if they are new and unknown. This will keep the laminate in perfect condition, even after being sprayed with paint or varnish.
The article was written specifically for