Methods And Types Of Laying Tiles On The Floor, Photos And Descriptions Of Beautiful Options

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• The traditional way
• Diagonal way
• Offset tile floors
• Herringbone tile laying
• Modular masonry
• Offset tile

If you made the decision to equip the floors in the room using tiles, then one of the main factors is to study the question of what options are available for laying tiles on the floor. After this issue is fully considered, all that remains is to select the tile. But now we will analyze directly the most popular tile laying methods.

First, a little advice. It is advisable to choose in advance the type of tile that you like the most. Note that the choice must be based on the shape and size of the room.

So, in total, there are six main types of tile laying. Among them:

1. Diagonal way.
2. Traditional.
3. Herringbone laying.
4. The way of arrangement is staggering, or as it is called in another way - with an offset.
5. Modular way.
6. And the last is the arrangement with a shift.

Well, now I have criminalized directly considering all types in more detail, taking into account their individuality, characteristics, and also the scheme of laying tiles on the floor will become an important factor. In addition, learn about the technology of tiling.

The traditional way

The first and most popular is the traditional method. By itself, it provides for the arrangement of the tiles parallel to the floor, in addition, laying in even rows, tightly pressing against each other.

In this case, the flatness of the surface becomes the basis for the quality of such masonry. Thus, we note that after laying each tile and row, it is necessary to check the level and eliminate any errors.

For the most part, square tiles are used for this type, at the same time, in some cases, rectangular tiles will also be a good replacement. For a better understanding, we offer you a laying scheme in the traditional way:

Among the features of such a pattern, you can notice an unusual and rather original look. Especially if you take elements of different colors. Thus, you can perform the laying as quickly as possible in this way. But do not forget that there are a number of features that must be taken into account without fail:

1. First of all, all defects and irregularities will be very striking. Therefore, the work should be approached as responsibly as possible.
2. The cladding itself of this kind can look somewhat monotonous, which is not always good.
3. In addition, this type is most optimal only in relation to ceramic tiles.

And besides, full compliance with the laying technology becomes a very important factor. The entire surface must be perfectly flat, and all dimensions of the joints are fully observed. But a good advantage is that there is no need for additional training.

Now we suggest you look at a few photos showing the surface made with this type of finish:

Diagonal way

The next, in the opinion of most, the most difficult and beautiful is the diagonal method. And even despite the fact that this type is based on the basic styling skill, the difficulty itself lies in the correct marking, which is not always as easy as it seems. Thus, carrying out this type of finishing will require certain skills, a large amount of time, as well as significant costs of materials, in comparison with other options.

For a deeper understanding, we propose to consider the scheme of such a layout:

It should also be noted that this method has a good advantage, which is expressed in the ability to skillfully mask surface irregularities and hide defects. Quite often, you can see the use of this type of cladding regarding non-standard floors, as well as rooms with small dimensions.

It is also necessary to notice a certain feature of the picture. Given that each tile in this case should be located strictly at an angle of 45 degrees, the best option would be to use a square tile. Thus, the floor pattern will look as impressive as possible, even when using monochrome materials.

It should be borne in mind that such an arrangement leads to a large amount of waste, since the tiles adjacent to the wall require cutting. Considering all types of laying tiles on the floor, this becomes the best, since it helps well to hide all surface defects. And in addition, it allows you to visually expand the space of the room.

The laying technology becomes a significant moment in this situation. Be sure to remember that all diagonal stripes must be carefully calculated. In addition, preparation, complete cleaning from old finishes and a primer are required without fail.

For the most part, they recommend using ceramic tiles, since they fit much better, while significantly reducing the consumption of the adhesive mixture.

In particular, the first row of tiles is laid in a standard straight way, while the length of the tiles must correspond to the diagonal of the base material. The second row is equipped with pre-prepared tiled triangles. All subsequent ones are already being arranged diagonally, in full compliance with the principles of installation.

Video:

Offset tile floors

Considering further the methods of laying the floor, you can notice the option of arranging it in a ragged manner. This variety resembles standard brickwork. This type is quite original and often found. The best option for him is laying rectangular tiles. But, moreover, the standard square is more often used. Such a variation will help get rid of the possible effect of momotony and create a certain historical atmosphere. And besides, it will help to hide possible small surface defects from the eyes.

As before, we present to your attention the installation scheme:

In total, considering the methods of laying tiles, it can be noted that this is most suitable for arranging the floor in the kitchen or corridor. This is due to his originality, which he conveys to the room itself. It should be noted that laying in this way can be performed both horizontally and diagonally.

Considering the first option, among the features, you can notice that it becomes a mandatory factor to lay the material in such a way that the middle of the tile coincides with the seam of the previous row.

Speaking about the second option, you can see that it also settles at an angle of 45 degrees, and looks quite impressive and unusual. But we note that in this case, the floor surface should be perfectly flat, because otherwise all the work will be done in vain, this type of masonry will give out all defects.

Considering the features of the work, it should be noted that it will be necessary to additionally lay lighthouse plates in the corners of the room. Such a step will allow you to set the floor level, which you will have to navigate in the future. Further, laying is carried out along the lighthouses, and with the help of a rubber hammer the coating is leveled, and the lighthouses are removed. After that, after a few days, you will need to additionally fill the seams with a solution.

For understanding, we suggest looking at several options for work performed in this way:

Herringbone tile laying

Considering further the options for laying floor tiles, you can see a rather original way. In particular, it implies the arrangement of the floor with tiles in the form of parquet. Such a solution will look quite unique, interesting and unusual. In particular, only rectangular material is used for laying herringbone tiles. Considering in more detail, it can be noted that there are only two variations of this type:

1. Plain herringbone
2. And also a view with an attachment.

We propose to consider the schemes of such masonry:

Among the features of this kind of finish, one can single out the most natural look. In particular, laying tiles with a surface that imitates natural wood becomes a good option. At the same time, it is not advisable to use this type in the case of using a material with imitation of a stone, since it looks unnatural.

Considering all the methods of laying floor tiles, a feature of this is the location of each individual element with a turn in different directions, while the basis is a diagonal arrangement. Moreover, this technique allows you to minimize the amount of waste.

Video:

Modular masonry

Also, tile laying methods imply the possibility of modular laying. This variation will help to give an extraordinary showiness to the coating, and will look quite original. Moreover, it is almost perfect solution. But the peculiarity here is the calculations, since it is necessary to accurately calculate and create a drawing project that will be executed.

A good feature and at the same time an advantage of such a solution is a wonderful view in small rooms. In addition, templates are completely absent and each drawing is created individually. The main thing is to make an accurate drawing, taking into account all dimensions of both the room and the tiles. In addition, you can use ready-made kits.

Considering the technology, one of the easiest way to complete the decoration can be noted, in particular, the use of large tiles with the image of small ones on it. But do not forget that you can do the pattern yourself, you just need to take into account all the features of the module's grid and that's it.

Offset tile

And the last option is the arrangement of the coating with a shift, which takes on a rather peculiar look:

Well, we looked at the basic options for laying tiles on the floor, and you can see that this process is quite easy. You just have to clearly highlight your preferences, and you can start making your design dream come true.

Video: