What Causes Cracks In The Ceiling, Tips On How To Prevent Their Formation

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• The causes of cracks
• Shrinkage
• Plastered plasterboard ceiling
• Dowel-screw kit
• Not primed ceiling
• Cardinal way of violation
• Elimination of defects on the ceiling
• What do you need to repair cracks?
• Elimination of cracks
• Professional recommendations

No one is insured against cracks in the plasterboard ceiling, most often they appear at the joints of the floor slabs and the entire appearance of the structure suffers from this. Even experienced craftsmen cannot give one hundred percent guarantee that after creating a drywall ceiling, cracks will not appear over time. And the point here is not in the skill of the construction team, but in connection with the presence of many accompanying factors.

It is necessary to consider this issue more thoroughly, because every crack in the plasterboard ceiling causes significant excitement among the owners. The question arises: what to do, how to fix this problem? First of all, you should determine the reason for their appearance.

The causes of cracks

Cracks appear on the plasterboard ceiling for completely different reasons. Among the most common are the following.

Shrinkage

The most common and common reason for the appearance of cracks on the ceiling is the subsidence of the structure. Unfortunately, here a person is powerless, because no one can stop this process, you just need to wait for its completion and not rush to erect drywall structures in a "fresh" building.

Plastered plasterboard ceiling

Any professional will say that in this situation, incorrect installation of the product is to blame. Most often, the problem arises in huge rooms where the laying is carried out from sheet to sheet, without using the offset of the seam. Then, even with small fluctuations in the structure, a crack may occur along the entire seam. For example, when driving along the road near a house of massive equipment.

Dowel-screw kit

As a rule, installation made with dowels and screws coming with them cannot withstand a lot of weight. Gradually, the owners begin to notice that cracks appear on the ceiling from the drywall. The bottom line is that the diameter of the screw in relation to the diameter of the dowel is too small and the walls of the dowel itself are very poorly attached in the hole. The result is a sag and a crack. In addition to suspensions, it is necessary to use rigid mountings with the ceiling.

Not primed ceiling

An equally common problem is the forgetfulness of masters or the lack of independent work. In the case when, before starting the putty stage, a person forgot to go through the primer. In almost ninety percent of cases, cracks will occur due to non-observance of ventilation and room humidity during repair work. The sheets absorb moisture and then dry out.

The main rule is that each layer should dry and then the next stages of work.

The main reasons have been identified, you can proceed to the second stage of studying the issue - methods of correcting and preventing repeated cracks.

Cardinal way of violation

The main violation of technology in the pursuit of material savings is that, according to Knauf standards, 2 layers of drywall sheets are used on the ceiling. The profile is fastened not with plastic dowels, but with metal nails or using a pneumatic gun to fasten the profile. More important tips for masters can be found in the article on the secrets of working with a file.

Elimination of defects on the ceiling

The question is how to remove the drywall cracks in the ceiling 's very important and requires special attention.

What do you need to repair cracks?

In order to know how to repair cracks on a plasterboard ceiling, you must have a set of building materials and master the method of eliminating cracks.

You will need:

• hard spatula;

• special hard knife;

• chisel for cracks;

• sandpaper;

• diamond special mesh;

• spatula 100-150mm;

• uniflot or fugenfüller solution;

• primer, paint and roller.

Now, you can proceed directly to sealing the cracks in the plasterboard structure.

Elimination of cracks

Repair work begins with filling the crack. It is expanded by 5-10 mm. Cleaned from putty. The painted surface is removed from each edge and covered with a net. A new layer of putty is applied, treated with a primer. After these works, the surface is puttyed with a wide spatula, the composition is well distributed over the entire ceiling. When everything is dry, putty should be applied again in order to eliminate minor voids. Next, the plasterboard ceiling is primed and painted in the desired color.

Professional recommendations

It is important to take into account the advice of specialists who know exactly how to fix cracks in the drywall ceiling. To avoid the appearance of cracks on the ceiling, we use fiberglass. If you need a guarantee against the appearance of cracks, use a non-woven paint or glass fiber spider line.

If we are not talking about a pure white ceiling, then you need to be prepared for a complete repainting of the entire surface. The fact is that if you paint only the place of repair, after drying, the paint may appear and differ from the general background. To do this, it is necessary to fill the entire ceiling, paint, and then the painted structure will look like one whole.

When leaks often occur in the house, it will be easier and cheaper to install a stretch ceiling, and then the cracks in the ceiling will not bother you. So, when mounting a plasterboard structure, you need to foresee the nuances of the functionality of the room in advance, so as not to face frequent problems of eliminating defects on the ceiling sheet.

Attention: in order to less face the problems of cracks on the plasterboard ceiling, you need not save money on material and specialists! Be careful in this matter and do not pay twice!

Video: