The Main Types Of Repair Of Shower Cabins That You Can Do Yourself

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• How to repair a shower hose
• How to repair a shower tray
• How to fix a shower mixer
• Siphon repair in the shower
• How to replace the cartridge in the shower
• How to replace glass in a shower stall
• Other types of shower repair

The main causes of malfunctions in the shower stall can be improper assembly or installation, as well as a long service life. Even very high-quality and expensive products are subject to all kinds of breakdowns and this is natural. However, repairing shower cabins with your own hands can be done quite simply if you understand how to fix a number of common problems.

How to repair a shower hose

Most often, the hose bursts in the shower stall. Before you repair your shower hose, you should go to the store and buy a new one, as the easiest solution is to replace it with a new one. To do this, you should:

• unscrew the watering can;
• using special keys, unscrew the nut from the mixer;
• wrap a new hose onto the mixer using rubber gaskets;
• wrap a new hose to the watering can with a nut.

When purchasing a new hose, it is best to go to the store with the old one. This will help you buy a product with a similar thread on the nuts.

If for some reason it is impossible to replace, then you need to find out how to fix the shower hose. To do this, you can select an element from a PVC-hose corresponding in size and diameter and insert it into a leaky place or install a clamp.

Video:

How to repair a shower tray

Due to improper installation, which arises from incorrect adjustment of the legs in the support frame of the pallet or due to inaccurate use, a crack may form in it. If it is not possible to replace it with a new one, then you need to know how to repair the shower tray.

In case of cracks not exceeding 35 cm in length or holes with dimensions not exceeding 100 × 100 mm, pouring liquid acrylic is an excellent solution to the problem. To do this, you need to purchase a repair kit for acrylic bathtubs, which includes liquid acrylic, hardener and abrasive laces. To carry out repairs, you should:

• expand the crack by a few millimeters with a grinder;
• clean the place of repair on the pallet from dirt, degrease;
• prepare a mixture of liquid acrylic and hardener, according to the instructions;
• pour the mixture into a hole or crack;
• remove excess mixture using a rubber spatula;
• seal with tape and leave to dry completely;
• remove the tape and polish the repaired area.

Having removed the hole or crack, it is necessary to find out and get rid of the causes of their occurrence. To do this, you can strengthen the pallet by laying out a brick cushion under it and filling it with polyurethane foam with a low expansion coefficient.

How to fix a shower mixer

The mixer in the shower has a more sophisticated device than in other plumbing fixtures. Various factors can cause breakdowns, which makes this phenomenon common. Therefore, for normal operation, you need to know how to repair a shower cabin in case of a mixer breakdown.

Video:

Often, many are faced with such a problem as a weak flow of water from the shower, this can be caused by a clogged aerator. To eliminate it, you must:

1. Remove the aerator.
2. Rinse it under running water or blow it out.
3. Install in its place.

If a spout leaks, the O-rings or rubber gaskets must be replaced. To do this, you should:

1. Unscrew the nut holding the spout and remove it.
2. Unscrew the grommet inside the spout together with the nut using a hexagon.
3. Remove the sleeve from the nut.
4. Replace worn-out O-rings with new ones.
5. Reassemble the mixer in reverse order.

In case of complex malfunctions that are difficult or impossible to eliminate, a complete replacement of the mixer in the shower is recommended for normal operation.

When troubleshooting faucets, it is not recommended to use gas or adjustable wrenches. All work can be done by hand.

Siphon repair in the shower

If the siphon breaks, it will create an unpleasant odor in the shower stall. In order to repair the siphon in the shower, remove the pallet screen, unscrew the upper part of the siphon and replace it with a new one.

Replacing a sewer siphon is a very laborious process. During this type of work, you will need rubber gaskets and special tools. It may also be necessary to remove the bend blockage. To do this, disassemble and clean the siphon.

How to replace the cartridge in the shower

If you follow the instructions, then replacing the cartridge in the shower stall is not difficult. First, you need to turn off the water from the common riser and raise the mixer lever to the highest position. After that, remove the cap with blue and red marks using a thin screwdriver. By loosening the screw under it, you can remove the mixer lever.

Next, you need to carefully unscrew the chrome decorative cap and nut that secures the cartridge using an adjustable wrench. After cleaning the cartridge seat, install a new one. After that, it is necessary to carry out all the listed processes in the reverse order.

Video:

How to replace glass in a shower stall

Replacing glass in a shower stall is a very simple process if it is doors, side and front windows. Replacing the rear walls involves dismantling the entire top of the shower stall, which complicates the process.

All glasses are installed using rubber seals. In order to remove the broken glass, it is necessary to remove one booth post, remove the seal and remove the glass fragments. Install new glass and repeat the same processes in reverse order.

In order to eliminate the possibility of subsequent glass breakage, it is recommended to protect them with an impact-resistant film. This method is suitable for ordinary non-tempered glass.

Other types of shower repair

Various problems can occur in shower cabins. Many of these are associated with leaks in pipes and connections that are hidden behind the shower panel. These types of problems are easier to prevent than fix. The panel is connected to the rear walls of the booth, and complete dismantling is required to access the communications. The exception is the shower box, which is not attached to the wall, and the repair is therefore easier. For troubleshooting, it can be simply pushed aside.

In addition, minor breakdowns such as wear on rollers and door handles may occur. In this case, before fixing the shower, you do not have to study complicated instructions, since the repair is simple.

As a result of aggressive action of various agents or mechanical damage, traces of corrosion can occur on metal parts. To eliminate them, you must:

• Sand the damaged area.
• In case of deep damage, apply auto-putty and sand again.
• Degrease the surface.
• Blow out the paint from the spray can.

When the cabin leaks, the equipment must be sealed. Before that, you should remove the old sealant and wash the frame with soapy water. Dry, degrease and apply new sealant.