Self-construction Of A Summer Shower At A Summer Cottage, Stages From Design To Cladding

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Shower planning in the country
• Dimensions of the country shower
• Installation of the summer shower foundation
• Arrangement of a garden shower drain
• Installing a garden shower frame
• Arrangement of the floor of the country shower
• Installation of water supply for a garden shower
• Thermal insulation of the construction of a country shower
• Facing the country shower

You can build a shower in the country with your own hands by following simple instructions. First of all, it is necessary to take into account how the country holiday from the city bustle will be spent. A long summer vacation will require the installation of a global permanent building. For a short stay for a good rest in the garden or in the garden, a simpler design will be the best option.

The main purpose of building a summer shower with your own hands is to carry out comfortable water procedures, which are highly desirable in the hot season. Therefore, one should very rationally approach the development of design parameters.

Shower planning in the country

When installing an outdoor shower with your own hands, you should decide on such important nuances as the organization of the drain, the method of supplying water to the tank and the method of heating it.

When choosing a location, it is recommended to pay attention to the following indicators:

• location of the water supply system;
• the presence of a hill;
• distance from a residential building;
• blow-through.

Normal water supply will be possible with proper consideration of the laying of the connecting pipeline. A quick outflow of waste water is ensured by a small slope angle. Therefore, it is best to build a shower room in the country with your own hands on a hill.

Video:

The building is not always placed close to a residential building, but it is not recommended that a very large distance from it. You should also give preference to the area most protected from drafts.

You can independently develop many projects that will make it easy to build a country shower with your own hands. A visual drawing will more clearly outline and determine the choice of the most successful layout of the future structure.

Dimensions of the country shower

A shower in the country should not be a narrow stall with a water barrel on top. When calculating the size of the building, you should take into account your own dimensions, as well as all those who will regularly use the shower. There should be a comfortable space inside that allows you to stand freely, turn around and bend easily.

When building a summer cottage shower with your own hands, the standard dimensions are 190 × 140 cm. With these calculations, the dimensions of the shower stall itself are 100 × 100 cm, and the changing rooms are 90 × 40. The height of the structure can vary from 2 to 3 m.

When marking the installation site of the future shower, you need to pay attention to the thickness of the material used. As a rule, with this type of building, a board is used, the standard size of which is 10 cm. Thus, assuming that the dimensions of the layout are 190 × 140 cm, a rectangle of 200 × 150 cm should be marked on the ground.

Installation of the summer shower foundation

Building a shower in the garden with your own hands involves the presence of a foundation, the thickness of which is directly dependent on the material used. With a heaving form of the soil, a monolithic foundation 40 cm high is recommended. Before installing it, it is necessary to create a sand cushion. For other types of soil, preference should be given to pile foundation installation technology.

To lay a pile foundation, you must:

1. Make holes in the soil 1-1.5 m deep or drive piles into the ground.
2. Install asbestos-cement or metal pipes with a diameter of 90-100 mm, leaving 20-30 cm protruding above the ground.
3. Make a depression at an angle for the drain pipe.
4. Insert the drain pipe.
5. Fill the piles with concrete, having previously prepared the concrete mixture according to the instructions.
6. Level the surface.
7. After drying, the foundation should be covered with a PVC film or two-layer roofing felt.

Arrangement of a garden shower drain

The drainage system must be installed taking into account the selected technology. The main place is occupied by the laying of the pipeline, which is connected to the general sewer system.

If there is no sewer system or gutter nearby, a hole should be dug that matches the size of the tank. On average, the dimensions of the drain pit are 2-3 m. In addition, it is necessary to think over the ventilation of the drain.

Installing a garden shower frame

An important step in the construction of a dacha shower with your own hands is the installation of the frame of the future building. For the frame, metal or wooden beams are used. The installation of the frame should be carried out in stages. This requires:

1. Install the beams in the corners and concrete them.
2. After the concrete has dried, carry out the lower and upper strapping.
3. Fasten the foundations of the walls to each other using rigid slopes.
4. To make an internal dressing, which serves as lags for the future floor.

Arrangement of the floor of the country shower

When starting to arrange the floor, you should take into account such requirements as a high degree of hygiene of the surface, ease of maintenance and the degree of sliding. The first stage in the design of the floor is the formation of a threshold, which will separate the dressing room and the washing compartment, and also exclude the flow of water. Further, you can mount a boardwalk or install a special shower tray.

When finishing with beams, there should be no gaps that contribute to the occurrence of drafts. The sump assumes the presence of a drain hole from which the hose is diverted. This part eliminates the accumulation of moisture on the surface after washing.

Installation of water supply for a garden shower

The main stage in the construction of a garden shower with your own hands is the installation of a water supply. An excellent reservoir for water supply is a metal barrel or a black painted plastic tank. The standard volume is from 100 to 200 liters. A water level meter or valve should be installed in the tank, which will shut off the flow of water when the tank is full.

The splitter can be installed above head level. This will help to avoid pressure drops during operation.

For a shower tank in the country with your own hands, you need to create a greenhouse based on beams covered with PVC film. The tank can be covered with foil, which will help speed up the process of heating the liquid from the sun's rays.

The reservoir must be mounted on top of the shower structure. To supply water, weld the water pipe or install a pump hose. Water heating can be done using a heating element - a thermoelectric heater. This method proves to be the most practical and economical.

Heating elements are divided into two types - dry and wet. Dry dryers work without direct contact with water, which eliminates the possibility of lime scale appearing on them. Therefore, such devices can last longer. However, wet heating elements are much cheaper, therefore they are more common. When installing electric heating equipment, it is necessary to take into account safety precautions, ensure water isolation from electricity, make grounding and install ultrasonic protection.

Thermal insulation of the construction of a country shower

To insulate a country shower, as a rule, foam plastic, expanded polystyrene and other insulating materials are used. To insulate the structure, you should:

1. Fill the frame space with insulating material.
2. Cover with plastic wrap and secure with a stapler.
3. It is also possible to install overhead insulation on the door.

Video:

Facing the country shower

Before you make a shower in the country, you should decide on the outer cladding. Most often, a material similar to a residential building is used. When choosing a material, one should give preference to one that provides ease of installation, as well as has strength and resistance to moisture. The best options are slate sheets, wooden beams, plastic panels.

The inner surface must be sheathed with moisture-resistant material. PVC lining is best suited. Wood is not recommended, which in this variant will have a short service life.