Universal Acrylic Putty For Walls And Ceilings, Rules For Puttingty Work

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• About the composition and features of acrylic putties
• A short video about why they came up with an acrylic putty
• How to rationally use acrylic putty
• What else you need to know about acrylic putty
• About the rules for carrying out puttying
• How to work with a trowel and putty on the ceiling and walls. Phased work.

For construction work both outside and inside buildings, acrylic putty is used. As it is already clear from the name of the material, the basis of the putty is acrylic, due to which the putty has high plasticity. After application to the surface to be treated, the acrylic filler forms a very durable layer. The mixture is also used for patching up small damages on the walls.

About the composition and features of acrylic putties

Acrylic fillers can be used to level surfaces, and can also be used for finishing walls before painting. This type of putty perfectly protects various surfaces from external influences. This material has excellent moisture resistance and fits perfectly on almost any surface, including:

• concrete;
• tree.

Talc is most often used as a film-forming material for the preparation of acrylic putty, and various whitewash is used to give color. Acrylic putty can be purchased both dry and ready-to-use in a sealed package. It does not shrink and does not crack after drying.

What are the advantages and disadvantages of acrylic putty over plaster? Perhaps the disadvantages of acrylic putty include a fast drying time after application (as a rule, it does not exceed 30 minutes), as well as difficulty in sanding and sanding. But its advantages include:

• excellent protection of treated surfaces from external influences;
• acrylic putty is very flexible. After drying, it forms a sufficiently strong protective coating;
• the dried putty prevents the penetration of water, however, it has good steam permeability;
• the building material is a clean and absolutely harmless product, moreover, it is fireproof;
• easy to apply to the surface, forming a single strong structure.

A short video about why they came up with an acrylic putty

How to rationally use acrylic putty

Acrylic putty based on water dispersion is used for the treatment of wooden surfaces, as well as concrete products, since it has increased resistance to moisture. The acrylic facade putty intended for outdoor use has good thermal insulation characteristics, so it is used for treating walls and any external surfaces. But universal acrylic putty can be used for interior finishing and other types of work.

It is important to know that a water-dispersed acrylic putty for walls is used to decorate the walls in rooms, and for ceiling work the putty mixture should be thicker, so you should choose a universal acrylic putty. At the same time, many are interested in the question of the consumption of putty for finishing surfaces, because a high-quality putty is not a cheap pleasure.

So, for interior finishing work, the average consumption of acrylic putty will be 1.1-1.2 kg for applying a millimeter layer per 1 m² of the wall. This thickness of the applied layer is sufficient to prepare the wall for painting or wallpapering.

For exterior work with facade putty, the consumption will be about 1.5 kg. It should be remembered that this type of material is highly resistant to moisture, so it can also be used for interior work in very humid rooms. In order to find out how much putty is needed for repair, an online calculator will help.

What else you need to know about acrylic putty

First of all, acrylic putty is on sale ready to use and does not require preparation for use. This significantly saves time, moreover, it does not require special knowledge to process the walls and ceiling with your own hands.

It so happens that sellers can offer to buy latex instead of acrylic putty. To determine which putty is better than latex or acrylic, you should know some of the features of putties with a latex base. Note that they are identical in composition and many features. In addition, latex putties are also used for all types of finishing work.

Latex-based putties are also available ready-to-use. If necessary, the putty can be given any shade. Due to the plasticizers contained in the putty, latex mixtures, after drying, are easily processed and do not crack. There are no other significant differences between these types of putties.

Please note that surface treatment with acrylic putty is quite fast. At the same time, after drying, all the flaws are visible on them, so if necessary, you can quickly correct the defects. It is recommended to pre-seal cracks and defects over 5 mm in size, because after drying, cracks may appear in these places. The answer to the question of how to get rid of cracks?

The negative aspects of working with acrylic putty include the difficulty in sanding and sanding surfaces. In addition, the dust generated during grinding is harmful to the mucous membrane of the lungs, therefore it is recommended to carry out this type of work in a respirator.

About the rules for carrying out puttying

In this article, we have reviewed all the main characteristics inherent in acrylic putties. Putting putty on the surface to be treated is not particularly difficult, so this can be done without problems with your own hands. If you have no idea how to work with a spatula and perform finishing work, then you can watch the training video under the article.

Before puttingty, a layer of primer is applied to the walls, after which you can start finishing.

You should also strictly observe all the conditions of the temperature regime (indoors and outdoors), which are indicated on the container by the manufacturer.

Next, check if all the rough work on the ceiling and walls has been completed, and also make sure that the wiring is insulated to avoid injury. Usually, finishing starts from the ceiling. After processing it, they begin to putty the walls.

Putting putty on the walls is carried out in several stages.

1. First, the putty must be mixed.
2. Then take a wide spatula, which will apply the solution to the walls or ceiling, and a small one, which needs to be applied evenly along the entire length of the finishing area.
3. The putty is applied in an even layer to the desired surface using vertical and horizontal circular movements.
4. After drying, the putty surfaces should be sanded and sanded. For these purposes, fine-grained abrasive paper is used.

The working mixture dries up within a day, and after grinding, places with defects will remain visible, which will need to be corrected. To achieve an ideal state, it is necessary to eliminate the flaws, and then clean these places.

You need to adhere to the following rule when applying putty to the surface:

1. A layer exceeding 5 mm in thickness will surely crack. Therefore, such places are processed in several approaches.
2. It is not recommended to bring the walls to perfect condition when streaks and waves appear. This saves time and can be easily removed by sanding.

How to work with a trowel and putty on the ceiling and walls. Phased work