Fixtures For Quick Application Of Tile Glue, Drawings And Video Tips

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Machine design
• Benefits of using homemade machines
• Possible options for homemade machines, video masters

Tiling is a monotonous process. It can be sped up using the original tile glue application tool - homemade gadgets that make the conveyor work. Some of them will also help to better control the volume of the applied solution.

Machine design

The main working body of many homemade machines is a spatula. It is mounted between two parallel wooden slats or strips of metal, which are spaced from each other at a distance equal to the width of the tile. The spatula is fixed motionlessly with the handle up, leaving a small space between it and the working surface.

Before applying the glue to the tile, place it under the trowel so that it is exactly between the sides of the machine, and the end of the trowel barely touches its edge. The front side of the tile should face the floor, and a mass of mortar is applied to the back. Then the tile is moved forward so that the spatula evenly distributes the adhesive.

Such a machine is stationary, but there is another version of it, when not the tile is moved, but the spatula itself. In this case, side attachments are needed so that the spatula does not go astray. At the same time, the tiles are lined up.

Another type of machine that can facilitate the application of tile glue can be designated by the word "stencil". It is a metal sheet with a rectangular slot, which is attached to the table top with hinges. The latter is equipped with stops for the tiles. The principle of operation of the device is that the tiles are placed on the countertop and covered with a sheet so that the treated surface of the material is in the slot. Next, glue is applied. What to do if you need to lay tiles around obstacles.

Benefits of using homemade machines

Thanks to the listed devices, the tiler's work is facilitated and accelerated. The need for manual labor is reduced, and more work can be done in a day with less effort. Due to the fact that the application of the tile adhesive to the tiles is carried out with the same efforts, the quality of work increases. If desired, the master can modify his tool - using a "stencil", for example, you can apply a solution with an indent from the edges of the tile so that the glue does not splash.

You can assemble any of the machines from scrap materials. For better fastening of parts, it is recommended to use self-tapping screws. If necessary, the machine can be disassembled and transported. The width of the treated surface can be easily changed. A calculator will help you calculate the number of tiles.

Possible options for homemade machines, video masters