Do-it-yourself Wall Putty Video How To Putty The Walls Correctly

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Do-it-yourself wall putty for wallpaper
• Plastered walls for painting
• Leveling corners with putty
• How to putty walls correctly
• How to quickly putty walls
• How to putty drywall walls without sanding the walls

Probably, each of you at least once in your life has come across repairs in your apartment or house. And more than once I heard about the putty of the walls. Recently, people often hire special workers who will cope

with this work, but nothing can guarantee you that it will be done perfectly, and more than that - why spend a lot of money, if you can learn and putty walls with your own hands will be a simple and common thing for you, and the result can be just wonderful … See how the installation of beacons on the wall and plaster is done. First of all, you do not need to hammer your head with such a concept as finishing putty. The thing is that, by its nature, this material itself is a finishing material. The putty can be divided into two groups: cooked putty and dry putty. This material is made on the basis of drying oil, and the types of putty do not differ so much among themselves. This material can be oil-cool, latex and others.

As a rule, putty is used to level walls and surfaces with painted enamel or oil paint. In general, the putty can be applied in a minimal layer, which cannot be said about dry mixes, where their layer starts from one millimeter. After drying, the putty leaves a very beautiful and smooth surface.

The choice of putty is very large today. But it is worth highlighting two important arguments on which it is worth choosing this tool that meets the requirements of your room - KR or ordinary putty and VH, that is, putty for rooms with high air humidity. It is worth paying attention to the putty of the VETONIT brand, since it really meets all the highest qualities that good putties should carry in their composition. This manufacturer is chosen most often by builders and the material has been tested over the years.

Moreover, the manufacturer of this putty brand has other advantages that convince that this putty deserves your attention:

1. This material is very easy to process.

2. If you have not used up this product in one go, then it can be used the next day, which many other brands of putty cannot afford. In order to preserve it, you only need to pour water into a container with a putty, and drain the next day, before you start working with it.

3. This material gives a slight shrinkage, which is a big plus.

4. A very simple method of preparation: pour about a quarter of the water into a certain container, pour the contents of the bag into the water and stir with a construction mixer until a homogeneous mass is formed. Stir the mixture again after three or five minutes.

It is worth recalling that you should not make a too liquid putty solution, as it can constantly collapse.

The product should be applied with a special spatula, and processed with ordinary sandpaper.

Now let's talk about - for what purposes are the walls putty and how to putty the walls correctly?

Do-it-yourself wall putty for wallpaper

The main task when puttingty a wall for wallpapering is to do the job so that then there will be no difficulties while pasting the wallpaper. Work must be done with putty or dry mixes. First you need to sand and prime the wall, see which primer is best to choose for these purposes. Then apply the mixture evenly and approximately in two millimeters layer. The mixture is applied with a spatula. The whole action happens like this:

1. You need to take a small putty knife (about sixty centimeters, but not more than eighty) and apply a small amount of putty (about ten or fifteen centimeters).

2. Now put the entire mixture on the wall and, holding the tool at about twenty to thirty degrees in relation to you, level the mixture on the wall. It will be ideal if you do all your movements diagonally, thereby aligning the putty, both horizontally and vertically.

3. An important point is that this work should be started from the left edge of the wall. And the next layer must be led in the direction of what has been done, so to speak, then a new layer must be applied as if overlapping.

But do not think that after the first layer of putty, your wall will immediately be smooth and perfect. The point is that there is no way you can avoid stripes from the spatula. Even the most real professionals of this business will not be able to do this with their own hands.

Video on the topic putty walls under the wallpaper

You can use an angle trowel to putty the inside and outside corners. This trowel will make your corner perfectly even very quickly and effortlessly. The angle will be exactly 90 degrees. To do this, at the very beginning, put putty on the edges of the walls, and then smear it gently with an angled spatula.

It is very important to remember that the thickness of the first layer should not exceed five millimeters, otherwise you risk getting not the best option - the putty may not dry out or crack. It is important that after applying the layer, it can dry for twelve hours, but no less. After the putty dries, sand the wall with P80 to P120 sandpaper. In order to avoid the formation of pits and depressions, you should use a special holder. After you have sanded the wall, you need to prime it again and apply the next layer of putty. But in this case, you don't need to build up the layer, you just need to bring the previous layer to an ideal state. After this layer is dry, prime the wall and your surface is ready for wallpapering.

Plastered walls for painting

There is a more accurate and quivering work ahead. After all, the most important task when plastering walls for painting is to create a perfectly smooth and beautiful surface, without any flaws. The application of the finishing putty is an important step. If you made any mistakes, then you can use water-based paint - it can hide some defects. But if you have chosen enamel for yourself, then you should try to create the perfect surface. This means only one thing - before painting, you should carefully approach the preparation of the wall, that is, carefully and well putty the wall. And if the need arises, then apply a large number of layers, the main thing here is not to be lazy and not think that the paint can hide the defects, because this may not happen and as a result all the flaws will come out.

The technique of applying putty is almost the same as preparing the walls for gluing wallpaper. The only thing that needs to be changed is the maximum length of the spatula - it should not be more than sixty centimeters. As for the sandpaper, in this case you should take no more than P120, and it is best to choose P150. Sanding will need to be under the lamp, that is, bring the light bulb directly to the wall itself during sanding. An article on how to sand a wall will help you in this matter. Thus, you can see all defects and not make unnecessary movements. Plastering the walls with your own hands is not difficult, but it requires patience and dexterity.

If you need to partially restore any surface, then you should work only with the area where you want to do it. If the paint is swollen, then we remove the paint, use a spatula to open the crack, primer and putty. But a very important point - the cracks should first be sanded and glued with a serpentine. All this is necessary so that this problem does not reappear after some time. See the video below for an example of how to putty the ceiling for painting, but this method is also quite suitable for walls. Find out the amount of putty that you need using the online calculator.

Ceiling putty for painting video

Leveling corners with putty

In order to make an even corner with a putty, it is necessary to take a plaster or paint corner profile, which is usually glued before applying the first layer with the plaster itself. But this method may not be the best for further painting. In order to solve this problem, you can use another option - just leave more plaster on the corners, and after drying, this material should be thoroughly sanded with sandpaper.

In principle, this is all you need to know when plastering walls. The most important thing is to understand how to do everything correctly, and, of course, try your hand. If you do everything according to the technology of application and work with putty, then you can expect excellent results. Below is a video example from the program "Repair World"

How to putty walls correctly

Video:

How to quickly putty walls

Video:

How to putty drywall walls without sanding the walls