Features Of Pouring A Floor Under Ceramic Tiles In Any Room

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Tiled floor
• Floor benefits
• Screed or fill
• Self-leveling floor technology
• Self-leveling floor on tiles
• Installation of tiles

When it comes to rooms with a high level of humidity (bathroom, toilet, kitchen), then tiles are the most common floor covering. This is due to the presence of the corresponding characteristics and properties of the material. But at the same time, the base for the tiles must be carefully prepared and have the properties of evenness and strength. For this reason, the best option would be the self-leveling floor under the tiles.

Tiled floor

When you need to lay tiles, the self-leveling floor must be performed with high quality. For this, various mixtures are used, presented in the assortment in stores. It is enough to dilute them with the required amount of water and fill them.

A large amount of water will not make the slurry more fluid. On the contrary, it will lose those properties and qualities that are inherent in the self-leveling floor.

Not everyone knows whether it is possible to lay tiles on a self-leveling floor or not. Here you can immediately pay attention to the final result.

After pouring with self-leveling compounds, the floor becomes perfectly even, durable and has a number of positive qualities. This base is ideal for tiles and other types of flooring.

This suggests that the self-leveling floor device is an excellent basis for the subsequent installation of tiles. In addition, due to the flatness of the surface, the consumption of materials (glue) for tiles is noticeably reduced.

Floor benefits

From the moment of their appearance, polymer-based building mixtures began to gain popularity among work performers. This is due to the fact that the mixtures have a large number of positive qualities, and the installation process itself does not require certain knowledge. They can be used not only for the finishing layer of the floor, but also as a base layer in order to level out all irregularities and smooth out defects. The surface becomes very durable and can withstand numerous loads.

If we are talking about the base layer, then it is suitable for the subsequent laying of floor coverings, among which ceramic tiles are very popular.

Not only a concrete screed, but also a wooden base can act as a base for the floor. In the latter case, you do not even need to remove old boards when there is no rot on them, damage and other defects. The existing seams can be covered with a special silicone-based sealant, and waterproofing can also be arranged so that water from the finished solution does not get onto the beams.

Due to the shortened drying time of the mixture diluted with water, tiles can be laid on the surface already in a short time. Usually this time is three days. It is worth doing a little carefully with laminate or parquet, since it would be better here to wait at least a week after pouring. During this time, all moisture leaves the solution.

Screed or fill

Everyone believes that a cement screed will be an excellent option for a base for a tile. Of course, among the advantages, one can single out the low cost in the end, as well as the low-cost process of preparing the solution. The very process of arranging such a screed does not take much time and effort, while allowing the participation of inexperienced specialists. It is enough just to have a good tile adhesive for the tile to be attached to such a base.

But the cement screed has disadvantages that can be called significant. Few would disagree with this. The minimum thickness is 30 mm. But this will immediately increase in the presence of large differences in floor height.

If you make it in a smaller layer, then over time it can crack, and will not have all possible strength qualities. If at the same time you also stick the tiles, then the distance to the ceiling will become noticeably smaller. Another important drawback is the drying time, which takes up to one month. The timing of repair work in any room will be delayed.

As for the self-leveling floor, the slightly high price immediately covers all the disadvantages and provides the performer with excellent properties and qualities. With its help, work will be a joy, and the time spent is reduced significantly.

Self-leveling floor technology

The most common version of the self-leveling floor is two layers. The first layer can even be called basic. But even so, it has a small thickness with many advantages. This is almost the same screed, but in a very thin layer. It should be noted that insignificant thickness is achieved by adding modifying substances to the mixture.

When the surface for pouring is prepared at a decent level and in compliance with the technology of the device, you can start mixing the solution. For it, mixtures are used depending on the requirements of the performer. Each of them has different properties and qualities. A separate category is those that are able to withstand high levels of humidity in the room.

The required amount of water is added to the powder and mixed thoroughly. It is worth noting that all the recommendations for mixing the solution are written on the package. The manufacturer advises to do everything in such a way that all qualities are preserved. Then the self-leveling floor will turn out to be perfectly flat, suitable for laying tiles.

The finished solution is poured onto the prepared base. It is worth noting that the installation should be carried out from the far corner of the room, where everything pours out. After that, the fill is leveled over the area of the room using a spatula or a rule. It is not uncommon to use two-component mixtures that are mixed before pouring.

It is very important to remove all air bubbles that may have formed during the filling of the screed and during the preparation of the mortar. For this, a needle roller is used, which is rolled over the entire area of the room. Complete drying of the mixture after pouring occurs after one day. This may be indicated by information on the packaging from the manufacturer.

Self-leveling floor on tiles

It is problematic to remove the tiles before installing the self-leveling floor. For this reason, the question arises as to whether it is possible to pour floors onto tiles. It will take a lot of time to beat off the old coating, and in the future you will have to additionally arrange a screed to smooth out the resulting irregularities.

So, is it possible to pour a self-leveling floor on a tile? It is possible, but for this you should prepare the base and check the tile for strength and reliability of fixation. If it does not fit snugly and protrudes, then be sure to remove it. Some problems arise with glossy tiles. Some will consider that in this case there will be practically no adhesion and the quality of the self-leveling floor will remain at a low level. To avoid this, the gloss is removed, after which the surface is carefully cleaned before pouring.

This suggests that you can pour the self-leveling floor onto the tiles. After that, it remains to pour out the prepared solution and level it with a spatula. That is, everything is done in compliance with the technology of the device of such floors.

The self-leveling floor can be poured onto the tiles, but it is very important to view the entire surface under it. If you skip this point, then in the future the problems will be much more serious associated with the dismantling of the flooded floor. Even specialists do not want to face this, since the process is very laborious. It is easier to fill in an additional layer, eliminating all errors.

Installation of tiles

When the surface is level and completely dry, you can start laying the tiles. For this, a special two-component adhesive is used, designed for flooring tiles. The consumption of glue, which is quite expensive, can be reduced due to the presence of a perfectly flat floor surface.

The self-leveling floor must be treated with a primer before laying the tiles. It is applied in several layers over the entire area without gaps. This increases the adhesion level and the adhesion of the tiles is much better.

After the installation of the tiles on the surface of the tiles, all seams must be cleaned, and the remnants of glue are removed from the surface.

If someone is interested in the thermal conductivity of such a "pie", then you should pay attention to the selected tile, since its thickness will be greater than the layer of the self-leveling floor.

Thus, if you pour a self-leveling floor for the subsequent laying of tiles in the premises, then the quality of work will be at a high level. In this case, the consumption of glue will be minimal due to a perfectly flat surface.

Video:

Video:

Video:

Video: