DIY Repair Of Old Wooden Windows. Restoration And Insulation Technology For Wooden Windows

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Stages of work:
• Insulation of old windows

As a rule, wooden windows have always been considered and still remain the most beautiful and high-quality windows among such a wide range on the market. It goes without saying that now completely different technologies are used in the manufacture of wooden windows and the quality obtained as a result cannot be compared with the quality of those windows that were installed in our houses 15-20 years ago. Accordingly, after so many years, old wooden windows will require replacement, or repair, insulation. Most people, of course, think that the restoration of wooden windows with their own hands is an unnecessary process and it is better to buy and install new modern plastic windows, but they do not have the qualities that are present in wooden windows, and even more so, the technology of restoration of old ones will not cost you a pretty penny, as opposed to buying new ones. You do not need to have special skills and knowledge in order to restore your old window with your own hands, since this process is not at all complicated. Let's outline some of the main steps.

Stages of work:

Preparing your old frames for stripping will be the very first step in DIY window restoration. This procedure is performed in two ways: mechanical or chemical. The first option will require a little more tools, such as chisels, screwdrivers, washers, brushes, spatula. To implement the second method, you will need a spatula and a hair dryer. If you have prepared all the tools, now you need to remove the frames from the window opening, and then rinse and thoroughly clean the frame of paint.

Shpatlevanie is the second action, or it may be called a second step, the restoration of wooden windows. In order to hide the existing large cracks on the frames, it is necessary to use glue and fix them with self-tapping screws. A fine grain sandpaper is ideal for polishing the frame after you have putty on it.

Next, the third stage is painting the window frames. Windows are painted in various ways, like with a spray gun, as well as a brush and a roller. The choice of paintwork is a very significant process, since the durability of the frames will depend on its quality.

Seal the windows with silicone, which are inserted into the frames already inserted into their places in the window opening, Do not skimp on silicone, it will retain moisture so that it does not get inside.

Insulation of old windows

Modern materials will help us with this. In a huge selection and installation method, tubular seals are considered the most reliable. Measure the width of the window frame and window gap in the following way: wrap a piece of plasticine in a plastic bag or film and close the window. When choosing the width of the seal, proceed from these dimensions. When installing, do not stretch the tape, it should lie flat. Secure the material with small studs or a construction stapler along the length so that the tape is fixed and does not slip or move from its place when the window is opened. These tips are enough to make an independent repair of old windows and insulate them. And as practice shows, wooden windows last much longer than their plastic counterparts.