How To Make A Computer Desk With Your Own Hands Quickly And At No Cost

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Where to start
• DIY table video
• Materials and tools that will be required during work
• Several ways to make a table for office equipment
• Method one: a simple rectangular MDF table
• Method two: corner table for a computer
• If there is a laptop in the house
• The easiest and free option
• Another way: folding laptop table

The age of modern technology is characterized primarily by an abundance of functional technology, the task of which is to make life easier for a person. Not the last place is occupied by computers and laptops. Agree, it is rare today to meet a person who does not have this technique. This is, of course, good. But after all, a computer or laptop must be put somewhere and not always buying ready-made furniture is the best option. And it's expensive, and you won't always find what you want to see in your room. There is a great way to solve this problem - to make a computer desk with your own hands. This is what we will do in our article.

Where to start

Before you make a computer desk with your own hands, you need to clearly imagine what you want to get in the end. In other words, you need a project. And if you are determined and want to get furniture at the end of the work that will become a real solution, you should think it over to the smallest parts.

First of all, pay attention to the functionality of the table. Consider whether you need additional shelves, drawers, special stands. It might make sense to make pull-out shelves.

Further, it is important to consider the height of the structure. It is recommended to make a standard ordinary table for a computer with your own hands within 750 mm. The table top is included in these dimensions. For a child, you can choose a lower height.

Do not lose sight of the estimated size of office equipment and the number of items. Before you cut out the shelves and make the boxes, you need to measure everything with a ruler or tape measure. Then you won't have to redo it in the future.

Finally, it is necessary to take into account the general parameters of the room and the place where it is planned to put the furniture. It should be comfortable and the lighting should be correct. Only then the person sitting at the table will not feel discomfort during work. The same parameters should be taken into account and if you want to make a table for a laptop with your own hands.

DIY table video

Video:

Materials and tools that will be required during work

Making a computer desk with your own hands is a laborious process that requires patience and attention. After drawing up the project, you need to decide on the materials that will be used. Most often, tables are made from:

• natural wood;
• Chipboard;
• MDF.

A wooden desk for a computer or laptop is preferable to others, but at a price it will cost much more and still have to be varnished. MDF and chipboard - materials are much cheaper and are not much inferior to solid wood. In addition, they perfectly tolerate high humidity and are insensitive to damage.

Which material to choose is a matter of taste. But the tool with which the work will be performed must be available without fail. Most often, the usual set is used, which every man has, even a not too experienced master:

• hacksaw, electric jigsaw;
• sanding machine;
• drill;
• screwdriver;
• chisel;
• roulette;
• square.

Naturally, this list may be slightly different, since it all depends on the design of a homemade computer desk with your own hands.

Several ways to make a table for office equipment

As mentioned above, it is not necessary to have special construction skills in order to make a computer desk with your own hands. There will be enough initial knowledge, desire and patience. For a more complete presentation of the upcoming volume of work, we will give several methods of making a table for a computer with our own hands.

Method one: a simple rectangular MDF table

For work, we need an MDF plate with a thickness of at least 16 mm, a set of tools from the list above, self-tapping screws, glue, fittings. First of all, we measure the place where the furniture is planned to be installed: width, length and depth. Based on these parameters, making a computer desk with your own hands, drawings are drawn up. Only after completing these steps, you can cut the MDF into pieces and then mount the table:

1. Using a screwdriver and self-tapping screws, we fasten the side parts with guides.
2. The side modules are assembled with dowels. Greater strength can be achieved using special glue
3. We use 4 mm thick MDF as the back wall, we assemble the table walls into a single whole.
4. Using the drawing, we cut out the elements of drawers and shelves, make fitting and fix the drawers with clamps. We process the side surfaces with edging tape.
5. On the underside of the tabletop of the computer table with our own hands, we mark the attachment points of the support pedestals. Using a drill, we drill blind holes.
6. With the help of screws, we fasten the curbstones to the inverted tabletop.
7. Turn over, fasten the hinges, hang the doors and insert drawers and shelves into place;
8. We attach the monitor stand using round wooden blocks, piping and glue.
9. We cover the made table with a primer, paint it in the desired color and start using it for its intended purpose.

Tip: in this way, you can make a computer desk from chipboard with your own hands and take any other material.

Method two: corner table for a computer

Now let's take a look at how to make a corner computer desk with your own hands. This work will require a little more attention, but the result will please - an empty corner of the room will function, and free space will not become less.

So, for work we need the following tools and materials:

• screwdriver or screwdriver;
• drill;
• clamps;
• wooden dowels;
• electric saw;
• knife sharp enough;
• iron, edging tape, ruler, square and pencil;
• joiner's glue;
• self-tapping screws.

We take 16 mm thick MDF sheets as the material, and hardwood for the support elements.

To begin with, we measure the space and make a drawing, according to which we carry out the detailing of objects.

If you don't know how to work with drawings, look for ready-made material. You can find drawings on the Internet to make a corner computer table with your own hands.

Having prepared all the details, we adjust everything to size and proceed with the assembly, which must be performed in stages.

1. We assemble the side parts of the table on dowels, fasten the guides for the shelves inside and the drawers that will slide out. You can strengthen the fastening with glue.

2. Fix the back walls with self-tapping screws.

3. We process the side edges of all structures with an edging tape, gluing it with paper and a hot iron. We cut off the excess part with a knife.

4. On the inner side of the tabletop, mark the places for the pedestals of the support, we drill blind nests. We turn the tabletop over and in this position we fix the pedestals.

5. Next, we return the table to its normal position, fix the side doors, install drawers and shelves.

6. We fasten the upper structure of the shelves with ties and put it on the table, install the monitor stand.

7. The table is ready. It remains only to paint it to match the overall interior. Thus, assembling a computer desk with your own hands is not as difficult as it seems.

If there is a laptop in the house

We have disassembled how to make a computer desk ourselves. But what if there is a laptop instead of a computer in the house? It would seem that the thing is quite mobile and does not require additional stands. But, as practice shows, lying in bed or on the couch with a laptop in hand is not always convenient. Therefore, now we will make a laptop table with our own hands.

The easiest and free option

First of all, we will consider a design that does not require special construction skills and not a penny of financial investments. It is tempting to make such a table for a laptop with your own hands. You can use parts of old furniture, remnants from repairs and other scraps of any building material.

You only need three parts: 2 side pieces and a table top. Its size will depend on the size of the vehicle. We will be making a 270x660mm tabletop. cutting it out is simple, the main thing is to measure it exactly.

The side slats will be a little more difficult: they should have a beveled side, which is attached to the tabletop. The dimensions of the side walls are 270 × 205 × 255 × 280 mm. it turns out that the back of our table will be raised by 280 mm, and the front, lowered by 205 mm. Thus, a small do-it-yourself computer desk for a laptop will have a slope, which will make it very convenient to work with.

The side parts are attached to the tabletop with self-tapping screws and are additionally reinforced with small corners. This increases the strength and reliability of the structure. It remains only to paint or trim it to your taste and preferences. There is nothing difficult in such a design, and if a person likes to study or have fun reclining, then why not think about how to make a table for a laptop with your own hands.

Another way: folding laptop table

The folding design of the table is a little more difficult to make, but if you often have to move from place to place, you should think about how to make a table for a laptop convenient and mobile. The following materials and components will be required:

• countertop material;
• material for side walls;
• screws or self-tapping screws;
• 4 folding mounts with a lock.

Any material that is available can be used as material. We cut out a tabletop 600 × 400 mm, side legs - 400 × 310 mm. Using a ruler and a pencil, mark on the inside of the tabletop where the leg mounts are installed. We make holes for screws, we fix everything securely and that's it - our do-it-yourself computer desk, the photo of which you see is ready.

Do not under any circumstances forget to fix the folding structure in the desired position. Make sure to remove the catch when folding the table.

As you can see, there are a lot of ways to make a computer desk with your own hands. The article discussed only the most accessible and simple ones. But there are craftsmen who are able to create such furniture that you will not find in any store.

Well, for clarity, watch the video on how to easily and quickly make a computer desk with your own hands, using the information of which you will cope with the problem easily and naturally.

Video:

Video:

Video:

Video: