Features Of Fastening Hinges For Glass Doors

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

Tips for choosing
What is the difference between glass door fittings and ordinary ones?
Methods for attaching the hinges to the glass sheet

Glass doors are widely used in offices, apartments, saunas, shops. They are distinguished by high strength, have an attractive appearance, but the mass of the structure is also considerable. In order to fix such an element, special hinges for glass doors are required, on the correct choice of which not only the appearance of the interior depends, but also the reliability of the structure.

Tips for choosing

Most often, hinges for glass doors are made of metal. This is due to the mass of the glass sheet: other material can easily deform. Different manufacturers offer different alloys, the design of the loop itself may also differ, it is also attached in different ways. When choosing a product, you need to pay attention to the following points:

What steel was used. Good hardware should be cold formed stainless material. This will make it not only durable, but also protect against corrosion.
Some hinges are made of brass, but in its pure form it is too soft, so the alloy must include other, harder materials.
A reliable option is a bronze alloy: it is durable, does not wear out during operation.
Aluminum alloy hinges are not uncommon.

The hinge tips for glass doors can vary in color, which allows you to choose the appearance you need for a particular interior. You can change the design of products using decorative overlays.

What is the difference between glass door fittings and ordinary ones?

Fasteners for glass doors have a specific design and are significantly different from those intended for conventional doors. The difference lies in the design, since the glass sheet cannot be simply drilled and secured with self-tapping screws, and in the fact that the hinges must be able to withstand serious loads. This is not only frequent use, but also a sudden change in temperature, for example, if the door is used in a sauna.

In order for the structure not to fail, the loop does not deteriorate, the metal must have special properties, it must be resistant to expansion from temperature, deformation, and rusting.

Methods for attaching the hinges to the glass sheet

There are several ways to secure the door. One of them involves drilling it in certain places: these must be through holes. The loop has two overlays, they do not come into direct contact with the canvas, there must be an elastic band between them. The blade and the hinge are bolted together.

Hinges for glass doors are not the most perfect, but they have certain advantages, which include the following:

The attachment position is clearly rehearsed.
The connection is quite strong.
The weight of the structure is distributed evenly.
Displacement of such a loop is excluded.

The disadvantages of such loops, however, are also enough. These include the following properties:

You cannot make a hole without a special tool.
The work must be carried out with high precision.
Large holes can only be made with a machine.
If damaged, the canvas has to be changed completely.

Gradually, this type of hinge is being replaced from the market by more modern hinges for glass doors without drilling. There are a lot of such structures, they are attached to the end of the canvas. It happens as follows:

The hinge is mounted one opposite the other. This can be done on any furniture that has glass doors, including regular front doors.
You can attach the loop not only to the wall, but also to the ceiling.
A glass sheet is inserted between the hinges and clamped firmly.
The structure is adjusted during door opening.
In order to correct the position of the blade, you need to slightly press on it or hit it with a rubber hammer, this must be done quite carefully.
After the final correct position is selected, the glass is clamped motionless.

Hinges for glass doors without drilling are equipped with special gaskets, which are not only able to secure the contact between the door leaf and the hinges, but also make their fixation more durable. The downforce is thus evenly distributed throughout the structure.

There is a third option for glass door hinges: this is a partially drilled design. It allows you to combine both methods, making them more efficient, but this technology is not used for structures weighing less than 20 kg.

In order for the hinge to be fastened firmly, small indentations are made in the surface of the door leaf. The clamping elements enter them, the rest of the hinge is pressed against the plane of the glass. Thus, a tighter connection occurs.

The glass door mount has the following features:

The downforce is distributed evenly.
It is not necessary to use special equipment to create grooves, however, using a machine is encouraged as it allows for greater accuracy.
The fixation of the glass is more reliable, the blade displacement is practically excluded, since the fastening elements securely fit into the grooves.
Partial drilling does not violate the integrity of the web, so it does not lose its strength, cannot collapse.
There is less chance of damaging door parts as the applied force has a large area.

The last option for fastening is gluing. Such a mount is suitable for both room doors and saunas, where sudden temperature changes are frequent, moisture may get on the hinges, the humidity is increased in principle.

Tip: You can use this mounting method for heavy sashes. However, it should be remembered that such structures cannot be repaired.

For a secure connection, use a specially designed glue. The mounting area must be carefully polished and degreased.

Conclusion: choosing the right mount for glass doors is quite difficult. Each type has its own advantages and disadvantages, but it is quite effective. The choice can be influenced by the cost of the structure. Many manufacturers install certain hinges right away.