
2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54
- Screed on a warm water floor
- Addressing firms
- Reviews
When the apartment has bare walls, you want to start carrying out repair work. But many have doubts about where to start and how best to do it. The best option is to do the floor. To begin with, you should make a floor screed device using a semi-dry method. This layer is intermediate between the future flooring and the base (overlap). He needs to be given enough attention so that the floor is level and at the same time meets all quality requirements. Has a semi-dry screed reviews both positive and negative. All of them will depend on the quality of work and strict adherence to technology. Some decide to do everything on their own, while others resort to the help of construction companies. In one case or another, there are pros and cons, and firms do not always do everything from start to finish.
Screed on a warm water floor
When a semi-dry floor screed is performed, the reviews will depend primarily on the desired result.

It is difficult to determine which type of screed will be more optimal, if, for example, arrange a warm floor under the floor covering. A semi-dry screed is perfect for a water floor due to its qualities and characteristics. It is very important to follow the technology of the "rough" floor. Fiber should be used as a reinforcing agent, which is a modern means that is gaining particular popularity. In addition, it has excellent thermal conductivity, which is necessary for such a floor device.
According to the reviews, it can be understood that consumers choose exactly the semi-dry floor screed for the warm version of the device due to the fact that there is efficiency, combined with high quality. But if you pour water into a dry mixture, the result will be the opposite and all "chain" qualities will be reduced to the minimum threshold. Indeed, for a warm floor and high-quality flooring, the proportions for all components should be adhered to. It will not be superfluous to use additional additives, as well as fiber. The latter improves the quality of the finished solution, makes it plastic and more viscous.

As for the drying time for a device such as a semi-dry floor screed, reviews on the forums indicate that it is better to wait a little longer than to deal with the consequences later. For the base to dry completely, a certain time must pass. It will differ depending on various external factors, be it temperature or humidity in the room. When a semi-dry screed is performed on a warm water floor, reviews say that heat guns should not be used for drying. They do not always remove moisture evenly around the entire perimeter. With a long-term presence of such equipment in the room, the screed, on the contrary, get rid of more moisture and the result will be disastrous - cracking, chips, subsidence, etc.
Addressing firms
In certain situations, people try to shift the entire burden of responsibility for the performance of work to construction firms. After the conclusion of the contract, the specialists begin work, bringing everything to its logical conclusion.

But here you should be very careful with the choice of a specific organization. There are a large number of them, but they all relate differently to the installation of a "rough" floor. This is due to the amount of payment, with the desire to get as much money as possible and at the same time do practically nothing. If you make a deal with such careless performers, then in the future, not only will you have to sue the firms, but you will also have to independently carry out all types of work before flooring. Such actions cause a waste of financial resources, a huge amount of time, which people so lack.
The best option for performing a semi-dry screed according to reviews of firms is to conclude an agreement and refuse to make an advance payment.

In this case, the money is transferred after the acceptance of the work. When the quality does not suit the customer, the specialists will have to redo everything. In most cases, the performers come up here with all the responsibility. Firms value their reputation and try to do everything with high quality at a decent level. This is what should be taken into account when choosing a specific company engaged in construction work. There is no doubt that the result will please you.
Some people always say that you should wait a certain amount of time before starting work.

This is of course natural, since there will not be a sufficient number of specialists, they will work at other facilities. But if this is repeated constantly, then you might even think that the work on the device of a semi-dry screed will also be postponed. It is much more pleasant when the contractor arrived at the site, examined the scope of work, told about the plans, set the preliminary cost. Everything about everything usually takes about one day. This approximate scope of work is 200-250 square meters.
Everything proceeds especially quickly if they have the appropriate equipment. And in principle, it should be mandatory if the company is constantly engaged in its work. According to the reviews, one can only say about one thing, when experts are trying to find a cheaper option to make a semi-dry screed and at the same time find available means, and not special tools, then the desired result is unlikely to be obtained.
When there is no personal experience in carrying out work, and the customer almost does not know how and in what sequence to do it, it is better not to waste your nerves and efforts, but to contact specialized organizations.

When performing a semi-dry screed on its own, it can come out more expensive due to poor-quality mixing of the solution, adding more water, even distribution of the mixture throughout the room, etc. This is focused on compliance with the technology of the device of such a floor option. Firms have been doing everything for a long time and know all the subtleties and nuances of the installation of a "rough" floor. Even if you have to pay a certain amount of money for it. In certain situations, it may even be cheaper than doing it yourself.
In this case, you can turn to specialists for help in choosing the right screed options, as well as the subsequent flooring. The main thing is that everything here is combined and does not contradict each other. It will not be superfluous to be personally present during the work. This will exclude the proportionality of mixing the solution, adherence to the technology of the device of a semi-dry floor screed. In this case, it is important that the raw materials purchased by the customer are added to the solution, or pay attention to the use of materials from the company's representatives. They can save money and instead of costly fill in low-quality raw materials.
Reviews
You can summarize the above, highlighting some of the pros and cons of consumer reviews about the semi-dry floor screed.
Not only did the contractor do all the work with high quality and on time, but they also removed all the garbage after the order was completed. A trifle, but nice. Kirill, 32 years old, Moscow.
In words, the construction company pointed to the minimum terms of order fulfillment, provided a five-year warranty for the final result, the use of only high-quality material in the work. In fact, if you read the contract carefully, a one-year guarantee is spelled out, dirty sand with clay from the quarry, and the deadlines were not always met. We agreed for one day, and an hour after the appointed time, they called back and talked about another date. Arseny, 43 years old, Nizhny Novgorod.
Having contacted the construction company, they not only advised in advance on the choice of a specific material for work, talked about possible pitfalls, and also subsequently proceeded to work. We were more than satisfied with the result. Svetlana, 29 years old, Noginsk.
When performing finishing work in the cottage, I had to resort to the help of a company engaged in the device of a semi-dry screed. They had all the required equipment in stock, thanks to which they did everything efficiently and very quickly. After them, all we had to do was continue the work and carry out the flooring of the required floor covering (laminate, tiles). A team of builders. Shchelkovo.

Video:

Video:

Video:

Recommended:
Features Device Sand Concrete Floor Screed In The Apartment

Technology for installation work on the installation of a screed on the base of the floor using sand concrete of the M300 brand, choosing the best type of sand concrete for the floor screed
Which Option For A Warm Floor To Choose For A Device Under A Laminate

Water and electric underfloor heating under a laminate, features of choosing a underfloor heating system, rules for operating a warm floor under a laminate, basic models of underfloor heating
Mesh Device For Screed Reinforcement And Floor Repair

Technology of reinforcing the screed using a mesh of various parameters, methods of surface restoration using a mesh, recommendations for work
What Set Of Tools Is Needed For A Quality Knauf Floor Device

Preparation of materials and tools for performing dry screed using Knauf technology, special and universal devices for installing a dry floor Knauf
Floor Leveling Screed Device: Tips And Tricks

What brand of cement is best for the screed, the composition and options for the device in the floor with a cement-sand screed in the room. The order of the work and the method of the solution preparation process