2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54
- Installation difficulties
- How to mount on plates?
- Other ways of attaching a plastic window
- How are windows mounted on an anchor plate?
- Sequence of work when installing a window on anchor plates
There are several ways to install plastic windows. Anchor plates for PVC windows are used quite often, they can be fixed in different ways. Each method has certain positive aspects, but not without its disadvantages. We will illustrate them by letting the reader choose the most acceptable option for him on his own, since it is impossible to offer a universal solution.
Anchoring the frame, while it may seem like a simple exercise, can actually cause many negative consequences, especially if the installation is done by a layman. Before deciding whether you need such a mount, you should carefully study the possible consequences of errors during operation.
- In this case, the frame is secured with anchor bolts. In order to make such a mount, you will need to drill a plastic window frame. The downside of this action can be called immediately the depressurization of the chambers of the glass unit.
- Freezing of the structure can become another problem, since the reinforcement of the system is violated during drilling. If the glass unit freezes, you will encounter excessive moisture in the room, and mold may appear on the slopes over time.
- Installation should be carried out by an experienced craftsman, since with inaccurate work, the plastic structure can stretch. If the geometry of the frame is disturbed, it will be difficult or even impossible to return it to its normal position.
However, despite all the disadvantages, this method of fastening has an important advantage: the window will be securely fixed, and it will be possible to dismantle it only by thoroughly disassembling it from the inside. Installation takes a little time, does not require alignment, as it happens with foam, after the installation is completed, the structure is immediately ready for use. The connection is considered the most reliable and durable. The bolts and plates themselves are inexpensive and sold in all hardware stores.
How to mount on plates?
Anchoring plates for PVC windows help to make the installation process quick and easy. One of the important advantages is that there is no need to pull the glass unit out of the frame. The profile system will not undergo drilling, which means that it will be possible to avoid problems that arise when drilling through the frame. Double-glazed windows will not depressurize, the structure will not lose rigidity, and will not freeze. There is no risk of skewing the frame. However, the method cannot be called perfect either: one of the important drawbacks is its unattractive appearance, since part of the fastening after installation will be noticeable.
Tip: the anchor plate can be hidden under the slopes, if they are correctly installed and masked with overhead elements.
The second significant drawback is the increased load on the structure with frequent opening of the shutters. The window can quickly fail, which is why experts recommend fixing only blind structures in this way.
Other ways of attaching a plastic window
There is a method that combines several methods of fastening the frame, in this case, you can avoid some of the disadvantages of both of the above methods. In the combined method, the upper part of the frame is attached to window anchor plates and the lower part is secured with anchors. This allows you to avoid impacts on the frame when opening, as well as to adjust its height.
How are windows mounted on an anchor plate?
Mounting plates for PVC windows are produced differently, so before installation you need to choose the right one. There are only two types of designs: universal, suitable for any window frames, and special, which are made for non-standard windows. Such elements have special ears, with which they can be fixed with self-tapping screws, placing them in the groove of the window profile. The universal plate has no lugs and is bolted.
Advice: for installation, you need to choose 4.5x25 mm bolts. Pay attention to the sting, it must have a drill for metal, otherwise it will be difficult to drill the structure.
Sequence of work when installing a window on anchor plates
If you are using standard windows, about 5 anchor plates are required. One of them will be located in the center of the frame, the rest are placed, stepping back from the corner about 20 cm. When installing, you do not need to remove the double-glazed windows or pull out the glazing beads: the plates will be attached to the outside of the window opening, in this case the fasteners are made through.
Tip: if the structure is large, for example, exceeds 4 sq. m, then it should not be attached to the plates, since the window will have a large mass. You can use a dowel joint, which can be combined with anchor plates.
The position of the plates on the wall is marked in advance so that the fastening is of better quality, a bed for the plate is knocked out in the wall with a chisel. The fastening element must fit tightly into the recess, without protruding beyond its limits. After installing the structure, it is recommended to fill the slots with foam: this will help to avoid drafts, as well as secure the window more securely.
Conclusion: mounting plates for PVC windows are a quick and convenient way of fastening, although not without drawbacks. With the right approach, it will become an affordable and quick solution for the reliable installation of a window structure.
An overview of the means, how to wash plastic windows and window sills at home, how to clean a plastic window sill from construction pollution. Products for the care of plastic windows and window sills
How To Choose Plastic Windows Correctly. What Is Better To Buy PVC Windows, Profile Slidors (slidors)
Ways to decide on the choice of plastic windows important tips which are better to buy PVC windows and choosing window frames made of plastic, by different companies
Plastic windows with stained-glass windows will make your room special. The use of film stained glass and other technologies to create a special interior
Restoration and restoration of a wooden window - DIY instructions for repairing old wooden window frames. How to remove paint from wooden windows, how to putty, treat with linseed oil and paint
Why do metal-plastic windows sweat? Quite common life situations are fogging of glasses when leaving the room, glass in the bathroom or windows in the apartment. Condensation is a problem that millions of people face. It is quite easy to identify the cause of this phenomenon if you consider several options. The main reasons for the appearance of condensation on metal-plastic windows, i.e. fogging are two factors - humidity and temperature. It is the change