How And What Is Better To Clean Windows At Home

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Chemical and folk cleaning products
• Rules for washing PVC windows
• Cleaning windows after installation
• Removing tough stains

Due to the resistance of polyvinyl chloride to chemicals, cleaning plastic windows at home can be done using almost any household cleaning agent. However, it is important to choose the right way of washing and follow a number of rules for cleaning quickly and efficiently.

Chemical and folk cleaning products

There are many household chemicals for cleaning windows. They have their own characteristics and act better against this or that type of pollution. Thus, the choice is based on the purpose of the wash:

• "Mister Muscle" is a universal remedy that removes most of the dirt. Advantages - no streaks on plastic and no strong chemical odor.
• "White Cat" is a microfiber cloth that gently treats a smooth plastic surface. It can be used with household chemicals as well as with ordinary soapy water or clean water.
• "Formula 409" - designed for fresh dirt.
• "Frosch" - is best suited for household dirt, and also effectively copes with stains left after window installation.
• "Sanita" - despite the absence of aggressive components, it copes well with old stains.

If you need to quickly remove dirt, but there are no cleaning agents, you do not need to worry, since you can wash plastic windows at home using folk remedies that are in every home. As with chemistry, different substances work for different types of stains:

• Soap or detergent solution - for removing streaks and bleaching plastic. Apply the product with the hard side of a sponge and then rinse with warm water.
• A solution of baking soda, vinegar, or starch - for removing old stains. When using alkali or acid, rubber gloves should be used as these products are corrosive to the skin.
• Chalk and tooth powder are low-abrasive substances that are safe for plastic, but effectively remove any type of contamination.
• Newsprint used to wipe down wet glass will help prevent streaks.

Important! Strong alkalis and acids must not be used to clean windows, as they destroy polyvinyl chloride.

So that washing does not cause difficulties, you should remove all contaminants immediately after they appear - this will allow you to achieve results even when using plain water, and you will not have to think about how to wash plastic windows at home.

Rules for washing PVC windows

In order not to harm the aesthetics of a plastic window, it is important to observe a number of cleaning rules. You should also take into account the circumstances - when cleaning a newly installed window and when washing old stains, different cleaning methods will be effective.

The main recommendations are as follows:

1. It is better to do washing in cloudy weather so that the glass dries faster.
2. First you need to wash the frame and then clean the glass.
3. The detergent should be applied evenly in one direction. Do not rub in a circular motion - in this case, stains will appear.
4. Alcohol-based products are best suited for cleaning glass.

Thus, there are no particular difficulties in how to properly wash plastic windows and window sills.

Cleaning windows after installation

After the completion of the installation work, many marks remain on the frames and glass. To correct them correctly, you need to take into account several points. First of all, you need to wait for the drying of the polyurethane foam and cut off its excess. If it gets on the plastic, you cannot scrape it off - you should use a special solvent or Dimexide, which can be bought at any pharmacy.

Important! Before you wash the frame, you need to remove the protective film from it. This should be done immediately so that the glue does not turn yellow and spoil the appearance of the window under the influence of ultraviolet radiation.

How can you clean plastic windows at home if they have just been installed? Since there are no serious chronic contamination yet, it is not necessary to use household chemicals. It is enough to dissolve a few small pieces of soap in a bucket of water and wipe the frame and glass with a soft sponge. After that, the window is wiped off with a napkin. This must be done quickly so that there are no stains left. A special rubber scraper will help with this, which will also allow you to achieve perfect glass cleanliness.

Removing tough stains

Some types of stains cannot be removed with standard cleaning products. These include:

• Glue. It remains after removing the protective film or tape. You can wipe it off with vegetable oil or dishwashing detergent.
• The very protective film. If it has time to dry, you will have to use hot steam, which will soften the old glue. After that, you can use acetone.
• Plaster. It gets on the frame when finishing the wall surrounding the window, it is removed with soapy water, but not the first time - you need to wait until the material softens.

When deciding how to wash plastic windows at home, you cannot resort to aggressive chemicals, even if the old stains are not rubbed off in any way.

Despite the fact that the window sill is somewhat different from the frame in appearance, it consists of exactly the same material, so the means and rules for washing are the same. The only difference is that the sill board can be rough, which can make it harder to wipe off dirt. Do not use hard metal rags or sharp objects - this will ruin the view of the window. The window sill can be cleaned with the same thing as you can clean plastic windows at home - with the usual non-aggressive household chemicals.

Video: