2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54
- Recommendations for the removal of nets
- A way to remove the frame mesh
- A way to remove the sliding mesh
- Removing the mesh on the plungers
- Other ways to remove the mesh if the design is different
The mosquito net installed on the window sometimes needs to be removed: this is necessary for winter storage, in order to extend the life of some types of structures, or to clean it. Knowing how to remove the mesh from a plastic window, you can do it yourself without harming the mesh frame. Removal methods may differ from product to product.
Recommendations for the removal of nets
Regardless of what type of product you have installed, if you decide to remove the mesh, you need to choose dry, calm weather. The net has a large area, so a gust of wind can rip it when you unscrew it, or pull it out of your hands. Falling to the ground is likely to cause the frame to break. The rain will drip on your face, which is not very pleasant.
If the design is the leaf, then removing the net from the box, think is not necessary. You just need to open one sash and unscrew the external fasteners.
A way to remove the frame mesh
It is easy to recognize such a structure: it consists of a metal frame with plastic or iron corners, and the mesh itself is stretched inside it. The corners themselves are usually located on the side of the street, and they are not visible from the room. Most nets have special handles, so you need to pull them up to remove. Raising the frame by 2 cm, this will release the lower mounts, then the structure must be pulled down.
Before removing the mosquito net from the plastic window, keep in mind that it will not pass through the opening just like that. It will need to be deployed on the street, and then dragged into the room. Remove all interfering objects near the window inside the room: first of all, this concerns the windowsill. If the mesh is equipped with pockets that are screwed into the corners of the frame, it can be removed in a similar way, with the only difference that you will not need to deflect it up and down, but to the side.
Some structures are connected by hooks. To remove such a mesh, you need to free the canvas from them without dismantling the hooks. The principle of operation is the same as in the case of fastening to pockets or corners. Details on how to repair a mosquito net with your own hands.
A way to remove the sliding mesh
If sliding windows are installed in the house, they are equipped with sliding grids: a feature of this design is its ability to move aside, using special sliders and guides for this. They are located at the top and bottom. Wondering how to get a grid of plastic windows, is not necessary. The mesh can be removed simply, just lift it slightly so that it comes out of the guide, and then pull it down with an offset.
If the mesh is pleated (it can be folded in a window opening), the technology of its dismantling is no different from a conventional sliding one.
Removing the mesh on the plungers
The pin connection is used quite often, as it is considered the most reliable. Such a structure is screwed to the window profile with pins from above and below. You can remove such a mesh only if you unscrew all the plungers that fix the pin, after which you can remove the mount and take the necessary actions with it.
Tip: to prevent the plunger from getting lost, it is recommended to rotate the pin only clockwise.
Other ways to remove the mesh if the design is different
Think about how to remove the mosquito net from the window, falls and in cases where it has some special structure: for example, the old-style grid. Such constructions are screwed to the frame with self-tapping screws or nailed with nails. You will need to pull out the fasteners or unscrew them. It is not recommended to leave openly accessible holes left by fasteners: they must at least be sealed with tape.
If you are dealing with a door mesh, then keep in mind that it is attached to its own hinges. To remove it, you will need to unscrew or disconnect them, depending on which hinge is installed. Some difficulties can organize roll nets, since they are placed above the window in a special box. Without dismantling the box, it is usually impossible to remove the canvas. If the frame is held on the flags, they will need to be bent, only after that it will be possible to dismantle the structure.
Conclusion: knowing how to remove the mosquito net, you can, if necessary, clean and repair it or remove it for the winter if you do not want the canvas to experience additional stress.
Video:
Recommended:
How To Remove Glass From A Plastic Window With Your Own Hands
In some cases, you may need to remove the glass unit from the plastic window yourself, and the most important thing is to know how to do it correctly, what we will actually consider
How To Repair A Plastic Window Sill Yourself
Repair of plastic window sills is an easy task for a novice master. Various types of window sills, description and video instructions for their restoration
How To Properly Dismantle A Plastic Window Sill
Removing the plastic sill may be required to replace it. Detailed instructions on how to dismantle a window sill from a plastic window
How To Clean Plastic Windows And Window Sills After Removal
An overview of the means, how to wash plastic windows and window sills at home, how to clean a plastic window sill from construction pollution. Products for the care of plastic windows and window sills
Do-it-yourself Wooden Window Repair - Window Frame Restoration
Restoration and restoration of a wooden window - DIY instructions for repairing old wooden window frames. How to remove paint from wooden windows, how to putty, treat with linseed oil and paint
