How To Choose Wall Paint, Video Tips And Methods For Painting Walls With A Roller

Table of contents:

Video: How To Choose Wall Paint, Video Tips And Methods For Painting Walls With A Roller

Video: How To Choose Wall Paint, Video Tips And Methods For Painting Walls With A Roller
Video: DIY Rolling Walls LIKE A PRO! 2023, September
How To Choose Wall Paint, Video Tips And Methods For Painting Walls With A Roller
How To Choose Wall Paint, Video Tips And Methods For Painting Walls With A Roller
  • Types of acrylic paints and methods of application
  • Preparing walls for painting
  • How to paint walls with acrylic paints

What is acrylic paint for walls and its properties Thanks to acrylic paint, the painted surfaces acquire not only an attractive appearance, but also have excellent wear resistance. In addition, painted walls and ceilings can be washed, and walls and other surfaces can be painted even in rooms with high humidity.

A characteristic feature of acrylic paint is the possibility of its tinting, so the surfaces can be painted with shades of a wide variety of colors. This paint can be used to paint not only prepared walls of premises, but also concrete surfaces, lime-cement plasters, brick walls, as well as fiber-cement surfaces.

Acrylic paints have a number of undeniable advantages:

  • Putty overview 2
    Putty overview 2

    Resistance to temperature extremes;

  • Consistent appearance of the painted surface over time;
  • Short drying time of the paint;
  • Does not crack, the surface is perfectly smooth;
  • Fireproof and practically non-toxic;
  • It is easy to apply to the required surface and is economical. Acrylic paint can be diluted with water if necessary;
  • Possesses excellent gas permeability.

The main components of acrylic paint are water base, acrylic dispersion and pigment component. The paint also contains film-forming polyacrylates.

It should be noted that acrylic can be used as a base for acrylic paint. It is a moisture resistant matt acrylic paint, which includes ground marble and an aqueous dispersion base using acrylates. These acrylic wall paints have a high hiding power and water-repellent effect.

Types of acrylic paints and methods of application

Acrylic water-based paint for painting walls has found wide application for interior work. Walls and ceilings can be easily painted with this paint. To do this, use brushes, various rollers or apply paint with a spray gun. You can buy such a paint in white, and various dyes are added to it to give different colors.


Acrylic water-dispersion paint has all the characteristics of acrylic paints and can be used to paint the interior surfaces of premises, and can also be used for outdoor work. Recommended for painting walls and ceilings in living rooms, as it has practically no odors and is environmentally friendly.

Pro-acrylic paint is used for painting inside dwellings, especially with high humidity. This applies to kitchens, bathrooms, toilets and others.

Acrylic paint for artistic wall painting is widely used to create beautiful, unique drawings and masterpieces that create interior refinement and entourage in rooms. The painting is very beautiful, which will make the home unique. To preserve the masterpieces for many years, special binder solvents are used instead of water.


Preparing walls for painting

For a beautiful wall decoration, you can use not only wallpapers of various textures and colors, but also use acrylic paint to decorate them. It should be noted that wall painting has a number of advantages.

Painted walls can be updated at any time or simply change their color. The same goes for minor repairs in case of accidental damage to walls or ceilings. If there are small children in the house, then they can easily paint the walls with pens and pencils. This problem can be easily solved with a few strokes of the paint roller on the wall.

In apartments with a small living space, designers also prefer to paint the walls in white or pastel colors, which can visually slightly increase the volume of rooms and non-residential premises.

Before applying acrylic paint to walls and ceilings, the surfaces to be painted must be prepared for painting. For this, a number of works should be carried out:

  • First, the walls are freed from old wallpaper. In this case, it is necessary to carefully monitor so that even the smallest pieces do not remain. If there was no wallpaper on the walls, then you need to remove the old plaster. The walls should be perfectly flat after preparation. Large differences can be leveled by plastering the surface using drywall sheets or starter plaster (isogypsum).
  • After rough finishing the walls, they must be treated with a primer, and then proceed with the finishing. Here it is recommended to use a polymer mesh for the putty, so that after finishing and painting the walls, the plaster and paint do not "break" and do not crack. First, a mesh is applied around the perimeter of the entire surface to be treated, and then a thin layer of putty is applied to it for a fine finish.
  • After the putty on the walls and ceiling has dried, sand the surfaces with a trowel net or fine abrasive paper. After sanding, the surfaces must be checked for irregularities, depressions, scratches, roughness and other defects that must be removed if found.
  • By sanding the walls and ceiling, you need to achieve a perfectly flat surface without defects, since the latter will be found after painting.

How to paint walls with acrylic paints

When carrying out painting work, it should be remembered that:

  • After each work, work tools should be thoroughly washed to avoid drying out. This applies to brushes, spray guns, rollers, trays and other tools used;
  • The container with the paint must be tightly closed after use so that it does not dry out, and lumps and films do not form in the paint itself;
  • Dilute acrylic paint in a container from which paint will be selected for work;
  • Before diluting the paint, read the manufacturer's recommendations, which solvent can be used for the product and whether water can be used.
  • Before painting, the sanded walls and ceiling must be covered with a layer of primer for deep impregnation of the painted surfaces and allowed to dry for 24 hours. After the walls are completely dry, you can start painting. First, baguettes, cutters, wall corners, joints of adjoining walls and ceiling are painted.

For perfectly straight lines, tape can be used if needed. After the paint dries, it is removed, leaving a perfectly straight line behind. The same goes for various stencils that are also used in the work.

Coloring can be done with wide brushes or various rollers. Painting the walls with acrylic paint with rollers is most convenient, since the maximum amount of area is covered. It is very convenient to use paint trays into which acrylic paint is poured. Here, on a special site, you can remove the excess. When asked how to paint without streaks? our tips for painting walls and ceilings will help.

For the best effect, it is recommended to apply 2 to 3 coats of paint after the previous one has completely dried. After finishing painting the required surfaces in the room, windows and doors should be kept closed to avoid drafts.


Interesting Articles
Features Of The Manufacture Of Modern Wooden Windows
Read More

Features Of The Manufacture Of Modern Wooden Windows

Modern wooden windows are in no way inferior to plastic ones. Description of the features of double-glazed windows of wooden windows and their advantages. What are the double-glazed windows for wooden windows? Is the structure sealed?

What Are The Disadvantages When Using A Semi-dry Screed
Read More

What Are The Disadvantages When Using A Semi-dry Screed

Negative qualities of floor devices using a semi-dry screed, the ability to eliminate the resulting manifestations from the negative side, careful adherence to technology

How To Choose A Good Manual Jigsaw, Which Is Better: Bosch Or Makita
Read More

How To Choose A Good Manual Jigsaw, Which Is Better: Bosch Or Makita

Recommendations when choosing a jigsaw. Description of basic and additional functions. Review analysis of jigsaws, detailed description of their technical characteristics and recommendations for use