Plastering The Corners Of The Walls With Your Own Hands. Making An Even Corner Of The Wall

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• How and with what to equal?
• Plasterboard method
• Wet plaster
• Directly about the very removal of corners
• Corner plaster
• Conclusion
• Corner alignment video

Corner alignment is the final stage of finishing the wall surface, before its final, finishing. The process is quite complicated and time-consuming, but you can do it yourself. The main difficulty of removing the corners with your own hands is that here you need to achieve a clear correspondence in 90C. But, on the other hand, the question is whether a wide-angle angle of 90C is needed. A clear breeding is not always necessary. For example, if you have a carpet hanging in this place, a deviation of several degrees will be completely invisible. But when installing modern, stylized furniture, even a half-degree deviation is striking. But this does not mean that you can leave everything as it is and not deal with this problem at all.

How and with what to equal?

How to level the corner of the wall with plaster? - there are two options for answering this question: by means of drywall or wet plaster. Consider options for resolving this issue.

Plasterboard method

The main advantage of drywall is that its surface is almost perfectly flat. Even the most difficult corners can be aligned with this element. In addition, the sheets are mounted on a pre-prepared frame made of aluminum profiles, so you can hide the curvature and unevenness of the walls in a fairly wide range, up to 10cm! The question of how to align the inner corner of the wall is best answered by a master who has been working with drywall for more than a year.

Speaking of the shortcomings, they consist in the subsequent putty and alignment of the joints. In addition, the corners will have to be displayed manually, but it is much easier to do this on flat surfaces.

Wet plaster

Plaster - everyone knows how to level the corners of the walls with plaster. This method has been known to our households for many decades. Among all the disadvantages of a large amount of dirt, physical and time costs, the putty has an undeniable advantage. The fact is that it is ideal for aligning corners in case of small fluctuations in height. Also, unlike drywall, it will save precious indoor space.

Directly about the very removal of corners

The most practical and rational way to align corners in a small apartment is still using the second method. Plastering the corners of the walls with your own hands begins with preliminary cleaning of the old wall.

Basic provisions:

• With the help of plumb lines and a level, the maximum approximate value is adjusted to 90C;

• In order not to spoil the removed inner corner during plastering, the corners are preliminarily pasted over with a special tape, which will allow fixing the obtained value, as well as strengthening the structure itself;

• After the place of work has been carefully prepared, and the corner is taken out, we proceed directly to the plaster and putty.

It is necessary to apply a layer of the mixture carefully and evenly, avoiding irregularities. When processing, constantly use a level, and in case you find deviations, immediately level them until the material dries and loses its elasticity.

You can use special profiles if you nevertheless decide to resort to the drywall method. The corner profile is attached to the surface of the corner, then cleaned and processed (priming, plastering, putty). The profile will allow not only to bring out an even corner, but also to strengthen it. After all, drywall, the material is very fragile and, in the absence of reinforcing elements, it can crack or chip at the slightest mechanical contact.

Corner plaster

How to plaster the corners of the walls without mistakes? In fact, the aesthetic component and the service life of the treated structure will depend on how correctly the plastering stage is carried out. In order to carry out the plaster correctly, we will outline the main mistakes that many beginners make:

Starting work without preliminary analysis. In this case, we are talking about assessing the basis, determining the material. If you have chosen the wrong building components that are not compatible with the base material, in the future you will have to take care not only of removing corners, but also of facing, eliminating cracks and fractures.

Be sure to attach a square to the wall to determine the angle. Then put a rule with a level, this will help determine the blockages of the wall.

Thanks to this, you will determine which type of materials to use, plaster or putty. Application of plaster without preliminary priming: in this case, after the surface layer has dried, the outlines of blocks, panels and bricks will appear on the slopes and corners.

Conclusion

And so, how to make an even corner of the wall with plaster or drywall? First of all, you need to bring it out using levels and plumb lines. Then level it with a rough finish, reinforce it with tape or profiles, and only then can you start surface treatment with plaster and putty. But, before plastering, it is imperative to treat the surface with a soil mixture. Now you know how to align the outside and inside corners of the room.

Corner alignment video

Video:

Video: