Ways To Eliminate Condensation On The Toilet Cistern And The Causes Of Moisture

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Causes of condensation
• Consequences of the accumulation of condensate
• Condensate removal methods

Condensation on the toilet cistern is quite common in residential buildings. Some apartment owners are absolutely indifferent to this, but for others it brings discomfort and fears about flooding. If condensation appears on the toilet cistern, what should be done then? He himself does not pose a big threat, the puddles themselves that form on the floor cause concern. It is not difficult to wipe off a little water, but if you do not do this constantly, it can lead to mold and an unpleasant smell. If you do not deal with such a problem at all, then in the future this phenomenon can cause flooding of neighbors.

Causes of condensation

Before removing condensate from the toilet cistern, you need to find out its true cause. If it is not identified, then it will appear again and again.

All causes of condensation are usually divided into several groups, namely:

1. 

   High level of humidity in the house. Various factors can also contribute to this. The most basic ones are considered to be the leakage of water pipes, the improper condition of the heating system, drying of clothes takes place in the apartment, as well as the presence of many indoor plants in the room, etc.;
2. Water enters the tank continuously. The main reason for this condition is a malfunction of the drain fittings. If everything is normal, then the liquid enters the tank only when it is empty. When the supply is carried out constantly, then it does not have time to warm up and temperature drops lead to the appearance of condensation. There are several solutions to this phenomenon: this is bringing the drain fittings to the desired state or equipping the room with an additional air dryer, the main purpose of which is to artificially change the temperature regime of the drain tank;
3. Since the bathroom is characterized by high humidity and warm air, faulty ventilation will cause condensation to form on the toilet.

If all devices and systems are in good condition, then the only reason that can lead to the appearance of water drops on the toilet tank will be temperature drops. A striking example of this condition is the cold season. If there is a problem with wet pipes, read here how to get rid of condensation on pipes.

Since it is warm in the house and cold outside, the water from the plumbing system comes at a low temperature. As a result, water droplets are formed on the container.

Since cold water is the main reason for the appearance of condensation, the solution is a simple and convenient way, this is the use of a thermostat, which at a cost of 1000 rubles. allows you to mix hot and cold water.

Consequences of the accumulation of condensate

If high-quality plumbing is used in the bathroom, then as a result of the appearance of condensation, one can not be afraid of corrosion and its consequences. But only the manufacturer himself can be absolutely sure of the reliability of the cistern and toilet. That is why you need to pay attention and take measures against corrosive processes. This is good both for safety reasons and in the case of preventing negative consequences.

If only high-quality materials were used for the production of plumbing, then much attention should be paid not to the entire device, but only to the metal elements of its attachment to the surface. Since condensation drops can get on the bolts, corrosion is inevitable in such cases. In order to prevent the occurrence of negative consequences, anti-corrosion grease will be the best protection options.

There is also the possibility of condensation dripping down the walls onto the floor, where it will be extremely inconvenient to remove the puddle, and in the worst case, impossible. This situation can threaten with additional evaporation, that is, a new source of high humidity will appear, as well as the accumulation of liquid on the floor will lead to the development of a fungal infection.

Condensate removal methods

Before you eliminate condensation on the toilet cistern, you should deal with the very reasons for its appearance.

When high humidity is the leading factor, the air outlet requires special attention. Thus, the ventilation system must be in proper condition, despite the opinions and decisions of many residents, for example, that it spoils the view, does not fit into the interior, etc. If the cause of their malfunction is poor draft, then the purchase of forced ventilation will be the solution to this situation. There are many of its varieties on the construction market, which may differ in power indicator, device and appearance.

When, when finding out the reasons why condensation forms on the toilet cistern, a malfunction of the cistern appears, then it is necessary to deal with the elimination of its breakdown or a complete replacement. When there is a constant flow of water into the toilet, it ultimately leads to large uncontrolled waste of fluid. It is not economically viable, especially when water meters are installed. Very often it is very difficult to find damaged parts, or they do not fit, then the second solution to the problem will be the best option.

The drain system needs to be set up. Before proceeding with its establishment, it is necessary to clean the container from limescale, which is located in the area of technological holes, and it is imperative to replace the sealing gaskets. In order to prevent mistakes during the replacement process, it is advisable to wrap the plastic nuts by hand, but tightly, since the tools can damage them. Use the wrenches when tightening the fastener

If condensate collects on the toilet cistern, then it can be influenced by changing the volume of drained water. An excellent solution would be the half-release button or using the double-press option of the flush button. If such a solution is not acceptable for the existing bathroom system, then you can think about replacing it with a more modern model.

Before buying toilets, you need to familiarize yourself with the different models. Today there is a unique model that, thanks to its original device, prevents the possibility that condensation forms on the toilet cistern. The main feature of such plumbing is the presence of a double wall in the cistern. It is designed in such a way that water enters a special container, which is located so that there is an air gap between it and the wall of the tank. It is not noticeable from the outside, but the result of such an innovation is amazing and condensation in such cases is unacceptable.

Another option for solving problems with the appearance of liquid droplets on plumbing is to replace the ceramic tanks with plastic ones. Since this material is able to transmit heat faster, and therefore the water heats up faster. Despite this, it will not be possible to completely solve the condensate problem in this way, it will only be a temporary safety measure.

Thus, it is possible to solve the problems with the unwanted appearance of water droplets in various ways, but the main thing in this is to find out the true reason why condensation is collecting on the toilet cistern.

Video:

Video:

Video: