How To Protect Children From Hot Water From The Tap, Temperature Controlled Faucet Solution

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

• Mixer device with thermostat
• The basic principle of a tap with a thermostat
• Types of water temperature control devices
• Pros and cons of thermostatic mixer taps
• How to choose the right device with a thermostat
• The nuances of operating a crane with a thermostat
• A simple and cheap way

It is not always easy to adjust the flow of water in the bathroom. This is due to the uneven supply of cold and hot water. Residents of multi-storey buildings face such a problem almost every day. To solve this problem, a faucet with a thermostat was invented, which allows you to get water with the required temperature in a matter of minutes. A thermostatic tap is very useful for families with small children, it allows you to protect yourself from hot water burns.

Mixer device with thermostat

The thermostat regulator was invented in Europe when society came to the conclusion that it is wise to use heat, water and electricity. Therefore, temperature sensors, regulators and mixers with a thermostat appeared in the everyday life of European countries. All these devices allow you to reasonably save the above benefits of life.

The valve device with a thermostat contains:

• temperature gradation, with the help of which the required indicator is selected
• a sensor that limits the temperature. It does not allow the temperature to rise above a given degree
• a heat regulator that changes the balance of hot and cold water in order to obtain the required temperature
• water flow regulator. This sensor turns on and off the water pressure so that it turns out to be optimal at the output.

Before starting the operation of the mixer, the required temperature is selected, after which the pressure is set. If everything works properly, then the consumer receives a stable flow of water and a comfortable temperature. With such a tap, the risk of scalding your hand is minimized, so even small children can use the mixer.

The basic principle of a tap with a thermostat

The work of the mixer from the thermostat consists in mixing hot and cold water and bringing it to a certain temperature, which is set on the sensor. Due to the fact that the control valve cartridge is made of bimetal, while adding wax, it is sensitive to any temperature fluctuations.

The principle of operation lies in the fact that a given temperature indicator from the fastening-adjusting screw enters the cartridge, which in turn narrows or expands. In almost all samples of mixers with a thermostat, special fuses are installed that do not allow the sensor to heat water more than 80 degrees. If the tap suddenly runs out of cold water, then hot water supply also stops automatically. With the subsequent resumption of the water flow, the water is again mixed and heated to the specified temperature, as a result of which it is supplied through the tap. Also, the device of the tap will not allow it to make the water too cold, and this is important for families where there are children who still do not know how to regulate the temperature of the water in the tap.

Types of water temperature control devices

The variety of plumbing manufacturers allows you to consider many options for taps with a thermostat, however, it is important to determine which type of appliance is best suited. The range of mixers is represented by both foreign and domestic brands, which are different in functionality and cost.

Today there are such mixers with a thermostat:

• Bathroom faucets.
• Shower faucets.
• Sink faucets.
• Kitchen faucets.
• Bidet faucets.
• Universal faucet thermostat at the inlet.

Each of the options presented has its own purpose. Faucets with a thermostatic bath and shower have a small size of the tap itself, as well as a convenient thermostat located to the left or right of the tap. This is done so that the adjustment is quick and comfortable.

Basin faucets are similar in appearance, but vary in the length of the faucet itself. The same miniature, but with a bend, produce faucets with a thermostat for a bidet. This type of crane makes its use convenient.

Taps with a high nose are usually installed in the kitchen for convenient washing of dishes. The thermostatic mixer for the kitchen will look the same, only a thermostat will be added to the side, allowing you to mix water to the required temperature.

In addition to the classification of mixers by purpose, they are also divided according to the type of control into:

• mechanical;
• electronic.

Mechanical designs are based on the control of a special temperature dial and are more common. Electronic devices are equipped with a display that indicates the temperature of the supplied water. Such a crane is powered from the network or from a battery. Water quality analysis can also be included in the list of functions. Some models of these mixers may have touch control, but this pleasure will cost much more.

By the way of fixing the mixer, they are divided into:

• open;
• closed.

The first type of cranes involves the installation of the device directly on the selected equipment. When installed, the closed type of device is hidden in the wall, and only the control panel remains outside.

Pros and cons of thermostatic mixer taps

Thermostatic mixers undoubtedly have their own advantages, the main of which must be highlighted:

1. Even with a complex device, the crane is very easy to operate.
2. The device supplies water that is stably heated to a high temperature.
3. The mixer is easy to self-assemble.
4. The water pressure will always be the one set by the consumer.
5. The device is safe to use, even in case of emergency breakdowns or water outages.
6. The tap significantly reduces the water consumption that would be spent on adjusting the desired temperature in the absence of a thermostat.
7. If an autonomous water heater is installed in the apartment, then a mixer with a thermostat will reduce the loss of energy when heating water.

This device is not without its drawbacks. These include, first of all, the high cost of the device. Although, those families who have a problem with setting the water manually due to poor pressure, consider this price to be justified.

Due to the fact that the quality of tap water in the central water supply is deteriorating every year, there is a risk of a problem with the thermostat valve. The device may become clogged, and its characteristics will change in a bad direction, as a result of which noise in the operation of the crane may occur. You can eliminate this problem by installing a water filtration system.

Low head and pressure drops in high-rise buildings are also a problem when operating a crane with a thermostat. Each device has its own manufacturer's recommended pressure. If there are no such indicators of water pressure, then it makes no sense to install a mixer.

Another disadvantage concerns electronic mixers with a thermostat. Due to their complex design, such specimens are rarely repairable in case of breakdown. It is not possible to fix them at home, and it will be difficult to find a good service in your city.

If these problems are eliminated: the water pressure is stable and the water in the pipes is of acceptable quality, you can safely go to buy a faucet with a thermostat.

How to choose the right device with a thermostat

Before you go to buy a device, it is important to decide: where the crane will be installed; whether it will be built into the wall or will remain in the public domain; it will be mechanical or electronic.

Among the offered models, pay attention to European brands. They are of high quality and corresponding price. Also, such devices are reliable and durable. Before purchasing, check all relevant certifications for device manufacturing standards. Do not forget about the warranty, as in the event of a breakdown, there will be an opportunity for free repair.

The nuances of operating a crane with a thermostat

A thermostatic tap is installed in the same way as a conventional mixer. You need to turn off the old tap and just connect the purchased new thing. You should not rush during the installation process. Connect the hot and cold water pipe correctly. All water inlets and outlets are marked on the mixer itself.

Before use, carefully read the technical characteristics of the device, its permissible pressure, water inlet and outlet temperatures. Do not neglect the installation of a filtration system to soften the water: this way the new mixer will last much longer.

After installing the tap, calibrate it. The temperature of the water supplied from the pipes will not correspond to the temperature scale on the mixer itself, for this it must be adjusted. Remove the thermostat cover, and using the adjusting screw, set the neutral position, then turn on the water. Using a water thermometer, observe how the screw turns as the temperature changes. Reach neutral and close the lid. The mixer is now ready for use and will last for many years with proper care and use.

A simple and cheap way

The principle of operation of the tap is based on a thermostat, so you can buy a separate thermostat tap and its cost will be many times cheaper. It is enough to install it under the sink and the problem with the water temperature is solved. The special advantage is that it can be connected to an existing tap. On average, it costs about 1000 rubles. Installation of a temperature controlled valve is simple and allows you to install it in a junction box.

Video:

Video:

Video: