How To Properly Paint The Ceiling And Walls With A Roller. Staining Technique And Work Order

2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54

Before starting painting work, you need to stock up on a roller and a bucket or bath in which squeezing nets are installed. This simple device will help you remove excess paint. You can also use classic baths, as in the picture on the left. Roller performance is much higher than brush performance. It can be used for priming and painting with lime, glue and oil paints. How to do it correctly, the do-it-yourself apartment renovation site will now tell you.

Steel, plastic or plywood can be used to make the squeeze mesh. It is necessary to drill holes with a diameter of 12-15 mm at a distance of 20 mm from each other in a checkerboard pattern.

You will not be able to paint the corners of the walls with a roller near skirting boards, platbands, etc. Therefore, in such places, paint well with a brush beforehand. It is important to choose the right nap of the roller; the result depends on it.

Technique for painting walls and ceilings with a roller

The staining technique is simple and is done as follows. We dip it in paint, then, to squeeze out the excess, roll it over the net. Now you can start coloring. On the walls, a roller is led from top to bottom and bottom to top, on the ceiling - in the direction of the rays of light. Stripes of paint are applied, overlapping each other by 4-5 cm. After dipping into the paint, the roller first applies a thick layer, so you need to roll it several times in one place. Then the paint is consumed on it, and it is necessary to increase the pressure on the tool.

Walls can be covered in one step with vertical stripes or in two steps, applying first vertical stripes and then horizontal ones. They try to shade the paint well. Quality is achieved by applying more coats.

Important! When painting ceilings or walls, completing the roller movement in one direction will structure the paint in one direction. Thanks to this, the ceiling does not glare and the paint lays down more clearly without variegation.

Sometimes the paint is applied with a brush, shaded well, and then rolled with a roller to level and get an even paint.

Using a roller, you can not only paint walls and ceilings, but also apply a primer to the surface.

A roller is a much more productive tool than brushes: it can paint up to 300 square meters of surface per day. It has a long service life. If it is made of high quality fur, then it will be enough to paint 3000 m2 of different surfaces.

After finishing the work, the roller must be washed in water, and then with soap, depending on which paint was used. Both from the lime composition and from the residues of oil paint, an unwashed tool will become unusable. Do everything right and it will serve you for a long time. Find out how much paint you need with a free paint consumption calculator.