2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54
Many people want to make at home not only beautiful and high-quality repairs, but also so that it is made of environmentally friendly materials. One of the most important factors in such an apartment renovation is the pasting and the choice of wallpaper. Most of the wallpapers on the modern market cannot meet the requirements of environmental quality, and mostly after renovation, ordinary wallpaper still has an unpleasant smell for a while. But still there is a way out of this situation - cork wallpaper. True, this option is more expensive and time-consuming, because such wallpapers cannot be glued in the usual way. But if you know all the nuances of this case, then you can cope with this work without much difficulty. As for the cost of such material, it is worth saying that this material fully justifies all the costs for it. So if you want to get a good refurbishment,then it is worth getting rid of all the doubts that have arisen.
Cork material for walls can be of two types - in a roll (the so-called "cork wallpaper") and in slabs. But do not be afraid in advance when choosing this or that type, because they are glued exactly the same.
First of all, you need to prepare all the available tools that you may need before gluing the cork wallpaper on the walls correctly:
1. Knife and scissors for cutting drywall.
2. A ruler, preferably metal.
3. Comb with a small tooth for applying glue.
4. Spatula for applying glue. It is best to take a small size.
6. Plumb line or spirit level.
How to glue cork wallpaper
Before gluing cork wallpaper, you should make sure that your wall is flat, processed and ready for use, that is, for wallpapering. It is necessary to understand that the wall should be absolutely even, since after gluing the cork material, all irregularities and flaws will be very striking, so you should take care of this in advance so that you do not regret what has been done later. But a strong wall putty is not necessary. You can just get by with lighthouse starting plaster or putty. In this case, it is possible not to use the finishing putty at all, but it is worth priming the surface or flaws with soil.
Sticking cork wallpaper begins with the purchase of a special cork glue or glue of similar composition. You can also choose acrylic glue, but then gluing may resemble gluing tiles. Here you will have to apply glue to the wall using a comb and press the cork boards hard against the wall.
It is very important to know that when working with cork wallpaper, they cannot be bent and deformed, as well as gluing them overlapping corners - all this is very important. This material should only be glued end-to-end, and cut with very strong scissors.
Due to the tight packaging, cork wallpaper is slightly wrinkled, which is why, before gluing, you should cut them into strips and let them lie on the floor a little. This also applies to tiles. Before you start work, you need to carefully mark the wall. To do this, you need to draw horizontal and vertical lines in the middle of the wall (this is very important especially when working with tiles). If you want to cut only at the bottom, you can slightly offset the horizontal line. If you are gluing wallpaper, then you should outline only a vertical line and start gluing from it in both directions, then the cut will be uniform on all sides. Now you can start gluing.
If you have chosen a thick glue, then you should type it with a small spatula and apply it to the wall with a comb. Apply the glue only to the glued area of the wallpaper sheet or tile, otherwise the glue may dry out.
After applying the glue, press the cork wallpaper firmly against the wall. It is best and correct to glue cork wallpaper together, since during work one person will press down at the top, and the other will hold the sheet at the bottom.
Glue this material butt joint, but make sure that no matter how glue comes out of the joints, and even more so on the cork itself. If, nevertheless, this happened, then you should not wipe off the glue immediately, it is best to wait, and after it dries, carefully tuck it up.
How to glue the ceiling plinth correctly: do-it-yourself installation of a baguette on the ceiling (video, photo). How to glue the ceiling foam or polyurethane skirting board, cut it using a miter box or in the absence of a device. Installation of a ceiling plinth - a detailed step-by-step guide for the master and beginner. What to look for when installing a foam baseboard
How to glue non-woven wallpaper on the ceiling correctly. Ways of gluing wallpaper to the ceiling yourself. Video instructions for carrying out preparation work and sequence
Before sticking wallpaper on a wall painted with enamel or water-based paint, you need to do a base test. You can glue wallpaper on walls painted with acrylic paint when you prepare
How To Glue Photo Wallpaper Correctly With Video. Pasting Walls With Photo Wallpaper, How To Paste, Prepare A Wall, Choose A Color
How to glue photo wallpaper correctly with a video example
Modern Wallpaper. A Variety Of Wallpaper For Walls, Characteristics And Types. Non-woven, Vinyl Wallpaper, Washable, Paintable
Among the most common and heavily used methods of interior renovation are wall and ceiling designs. Fast, and what is important - high-quality, the change in the design of walls and ceilings can be done using traditional wallpaper. Of course, the choice of the type of wallpaper plays a significant role, given that the range of modern building materials is unusually wide and varied. In this article, a do-it-yourself apartment renovation site will consider some of the main types of modern