2023 Author: Philip Bishop | [email protected]. Last modified: 2023-08-25 07:54
First you need to decide where the future cabinet will stand and what dimensions it will have. Take a tape measure or a ruler and take all measurements - width, depth, height. It is also necessary to make a drawing of how the cabinet will look from the inside and outside.
Drawings can be made in special programs or on a sheet of paper. To save money and space, walls can be used as side or back panels. But this option is only suitable if the walls are flat. It will also be useful to go to a furniture store to "touch" sliding wardrobes. Pay attention to the details of the design, fittings, assembly, etc. We have already told you how to make a built-in wardrobe with your own hands without video, but you can familiarize yourself with the drawings and instructions.
When all sizes are known, you can start making parts. It is better to use imported chipboard as a material, it is stronger.
- All parts must be cut strictly to size. It is problematic to do this with a hacksaw. Therefore, in order to save money, it is better to cut the chipboard sheets in a specialized store upon purchase.
- The edges of the parts must be self-processed with a milamine edge. This can be done with an iron at medium power. The edge is applied to the edge of the part, draw from the top with an iron and that's it. After a minute, the cooled film can be trimmed with a clerical knife.
All parts are attached to each other and to the wall using metal corners and self-tapping screws. First, you need to calculate how many corners will be needed and where they will be located so that the wardrobe is durable and stable. The door rails are also fastened with self-tapping screws. The top rail is installed first, and then the bottom rail parallel to it.
The main thing is to assemble the doors exactly according to the scheme. The guides are set strictly according to the level, otherwise the doors will slide to one side. If a gap forms between the door and the wall, the door can be adjusted with a special key. The adjustment hole is on the side at the bottom.
- If there is a wall as a back wall, then shelves and drawers are first attached. Then the side panels, and then the doors.
- If the sliding wardrobe is completely assembled from the sawn elements, then the frame is first assembled - the back and side walls.
Assembly is best done on the floor with the cabinet facing down. In this case, special attention must be paid to the rear wall. It must be carefully leveled and screwed on evenly, since it will act as the main element of the frame. After assembling the frame, the structure is lifted and shelves and boxes are mounted.
DIY wardrobe video tutorials
From Nikolai Nalimov, a video instruction is presented on how to fill it correctly and what to consider when making a do-it-yourself wardrobe.
Economy option wardrobe
Modern wardrobes have a lot of convenient fittings, which certainly puts them on a level higher in functionality compared to any standard product. Manufacturing of kaaf coupes under the order for your size and design will be performed by Wiskorp
A wardrobe with sliding doors will take up very little space in the apartment. Review of materials and choice of mechanism for sliding doors for the cabinet. Why is it important to buy quality fittings?
A wardrobe around the window is a good idea to use the space. original options for the arrangement of furniture for any room in the house: kitchen, bedroom, nursery, dressing room
How to determine which substrate is better to use under a warm floor and avoid mistakes when choosing. What is the thickness of the substrate. What is better penofol or polystyrene
How To Make A Wardrobe With Your Own Hands, Built-in. Drawings And Assembly Diagrams Of The Sliding Wardrobe, Self-installation Of Sliding Doors
Do-it-yourself built-in wardrobe with a photo. How to make a sliding wardrobe yourself, refine, install sliding doors with detailed photo instructions, you will learn from us